How to install the exhaust pipe assembly on 2008 Toyota 4Runner?

The 2UZ-FE engine requires a new gasket before installing the exhaust pipe front to the exhaust manifold while securing the front exhaust pipe with 2 nuts tightened to 62 Nm (633 kgf-cm, 46 ft-lbf) torque specification. The installation of the No. 2 exhaust front pipe assembly requires placing two new gaskets and media between the manifold and front pipe before securing with two bolts and two nuts that should reach 62 Nm (633 kgf-cm, 46 ft-lbf) for the nuts and 48 Nm (489 kgf-cm, 35 ft-lbf) for the bolts. Vernier caliper examination of the exhaust pipe assembly center compression spring length must reveal at least 40.5 mm (1.5945 in.) otherwise replace the spring. Secure the exhaust pipe assembly front with 2 bolts and 2 springs while using a new gasket and tightening both bolts and springs to 43 Nm (440 kgf-cm, 32 ft-lbf). Put the exhaust pipe center gasket new on the tail pipe center then fasten it with two bolts tightened to 48 Nm (489 kgf-cm, 35 ft-lbf). The heated oxygen sensor for Bank 1 Sensor 2 requires installation on the exhaust pipe front with torque set to 44 Nm (450 kgf-cm, 33 ft-lbf) before connecting the sensor connector while checking for twisted wires that need removal and installation of the sensor. Reperform this method on the heated oxygen sensor for Bank 2 Sensor 2. Exhaust gas leaks need to be checked as the last step.

OEM 2008 Toyota 4Runner Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Exhaust Pipes found

View related parts
2008 Toyota 4Runner Resonator & Pipe
Part Number: 17430-50220
$261.65 MSRP: $342.17
You Save: $80.52 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Direct-Fit Exhaust; System Kit; Resonator; Muffler; Muffler & Tail Pipe; Tailpipe; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.60 Pounds
- Item Dimensions: 44.5 x 13.3 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-50220
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2008 Toyota 4Runner Crossover Pipe, Front Driver Side
Part Number: 17450-50121
$1296.39 MSRP: $1740.12
You Save: $443.73 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Front; Catalytic Converter, Left; Exhaust Pipe; Front Pipe; Converter & Pipe; Cross Over Pipe; Pipe Assembly, Exhaust, Front; Catalytic Converter
- Position: Front Driver Side
- Part Name Code: 17450B
- Item Weight: 11.50 Pounds
- Item Dimensions: 40.0 x 14.3 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17450-50121
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 8 Cyl 4.7 L GAS
View related parts
2008 Toyota 4Runner Intermediate Pipe, Center
Part Number: 17420-50260
$547.06 MSRP: $734.32
You Save: $187.26 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Muffler Assembly; Direct-Fit Exhaust; System Kit; Tail Pipe; Muffler & Pipe Assembly; Muffler & Tail Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Center; Muffler
- Position: Center
- Part Name Code: 17420
- Item Weight: 17.50 Pounds
- Item Dimensions: 53.5 x 20.8 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17420-50260
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2008 Toyota 4Runner Resonator & Pipe
Part Number: 17430-31410
$257.57 MSRP: $336.83
You Save: $79.26 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Direct-Fit Exhaust System Kit; Resonator; Muffler; Muffler & Tail Pipe; Pipe Assembly, Exhaust, Tail
- Part Name Code: 17430
- Item Weight: 10.40 Pounds
- Item Dimensions: 46.6 x 12.9 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-31410
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota 4Runner Front Pipe, Driver Side
Part Number: 17450-31030
$1284.01 MSRP: $1723.52
You Save: $439.51 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Front; Catalytic Converter, Left, Rear Left; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front; Catalytic Converter
- Manufacturer Note: *114=TOYOTA/T38/Y
- Position: Front Driver Side
- Part Name Code: 17450B
- Item Weight: 7.30 Pounds
- Item Dimensions: 35.4 x 5.1 x 17.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17450-31030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota 4Runner Front Pipe
Part Number: 17410-50450
$1207.86 MSRP: $1621.29
You Save: $413.43 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter, Right; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front; Catalytic Converter
- Position: Front
- Part Name Code: 17410
- Item Weight: 8.30 Pounds
- Item Dimensions: 34.8 x 7.5 x 18.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-50450
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 8 Cyl 4.7 L GAS
View related parts
2008 Toyota 4Runner Front Pipe
Part Number: 17410-31450
$1197.53 MSRP: $1607.43
You Save: $409.90 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter, Rear Right, Right; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front; Catalytic Converter
- Manufacturer Note: *114=TOYOTA/T37/Y
- Position: Front
- Part Name Code: 17410
- Item Weight: 10.00 Pounds
- Item Dimensions: 35.0 x 5.3 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-31450
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota 4Runner Pipe Assembly, Exhaust, Center
Part Number: 17420-50220
$541.61 MSRP: $727.00
You Save: $185.39 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Muffler Assembly; Exhaust System Kit; Exhaust Pipe; Tail Pipe; Muffler
- Position: Center
- Part Name Code: 17420
- Item Weight: 16.10 Pounds
- Item Dimensions: 54.5 x 21.6 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17420-50220
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2008 Toyota 4Runner Exhaust Pipe

Looking for affordable OEM 2008 Toyota 4Runner Exhaust Pipe? Explore our comprehensive catalogue of genuine 2008 Toyota 4Runner Exhaust Pipe. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota 4Runner Exhaust Pipe Parts Q&A

Q: How to install the exhaust pipe assembly on 2008 Toyota 4Runner?
A: The 2UZ-FE engine requires a new gasket before installing the exhaust pipe front to the exhaust manifold while securing the front exhaust pipe with 2 nuts tightened to 62 Nm (633 kgf-cm, 46 ft-lbf) torque specification. The installation of the No. 2 exhaust front pipe assembly requires placing two new gaskets and media between the manifold and front pipe before securing with two bolts and two nuts that should reach 62 Nm (633 kgf-cm, 46 ft-lbf) for the nuts and 48 Nm (489 kgf-cm, 35 ft-lbf) for the bolts. Vernier caliper examination of the exhaust pipe assembly center compression spring length must reveal at least 40.5 mm (1.5945 in.) otherwise replace the spring. Secure the exhaust pipe assembly front with 2 bolts and 2 springs while using a new gasket and tightening both bolts and springs to 43 Nm (440 kgf-cm, 32 ft-lbf). Put the exhaust pipe center gasket new on the tail pipe center then fasten it with two bolts tightened to 48 Nm (489 kgf-cm, 35 ft-lbf). The heated oxygen sensor for Bank 1 Sensor 2 requires installation on the exhaust pipe front with torque set to 44 Nm (450 kgf-cm, 33 ft-lbf) before connecting the sensor connector while checking for twisted wires that need removal and installation of the sensor. Reperform this method on the heated oxygen sensor for Bank 2 Sensor 2. Exhaust gas leaks need to be checked as the last step.

Alternate Year Models

2007 Toyota 4Runner Exhaust Pipe 2009 Toyota 4Runner Exhaust Pipe