How to service and repair the throttle body on 2007 Toyota Tundra?

Question

Accepted Answer

Services and repairs on the throttle body require disconnecting the negative battery terminal cable followed by a 90-second wait after ignition switch shutdown so the navigation system can record its memory and settings. Start the engine service by removing engine under cover no. 1 while draining the coolant before taking out the front wiper motor with link assembly. You need to detach the front cowl top outer panel subassembly combined with the V-bank cover as well as the No. 2 air cleaner hose followed by the air cleaner assembly with element. The removal process includes disconnecting the throttle body with motor assembly through disconnection of the No. 5 and No. 4 water by-pass hoses and throttle position sensor and throttle control motor connector. Use the needed four bolts to remove the throttle body with motor assembly including its gasket. The installation entails putting back together the throttle body and motor with fresh gasket then securing it using four bolts at 11 N.m (112 kgf.cm or 8 ft.lbf). Reconnect the throttle position sensor and both water by-pass hoses along with the throttle control motor connector. You should reinstall the air cleaner assembly with element as well as the No. 2 air cleaner hose while connecting the cable to the negative battery terminal but initialization procedures may be needed for some systems after installation. Engine coolants should be added before engineers reinstall the V-bank cover and front wiper motor while checking for leaks. The repair process ends with installing the No. 1 engine under cover unit.

OEM 2007 Toyota Tundra Throttle Body

3 Throttle Bodies found

2007 Toyota Tundra Throttle Body

2007 Toyota Tundra Throttle Body

2007 Toyota Tundra Throttle Body

2007 Toyota Tundra Throttle Body

2007 Toyota Tundra Throttle Body Parts Questions & Experts Answers

Related 2007 Toyota Tundra Parts

Alternate Year Models