OEM 2007 Toyota Tundra Brake Light Switch

2007 Toyota Tundra Parts Questions & Experts Answers

• Q: How to service and repair the Brake Light Switch on 2007 Toyota Tundra?

  A: The first step to repair the Stop Light Switch is to remove the assembly by disconnecting the connector and rotating it according to the arrow direction to unfasten it. The next step requires removal of the stop light switch mounting adjuster through unfastening its 2 claws. Installation requires attaching the 2 claws to install the adjuster followed by position of the stop light switch against the pedal cushion while applying a force below 98 N.m (1000 kgf.cm, 72.3 ft.lbf). Secure the stop light switch to the adjuster by rotating it clockwise by 90 degrees to achieve proper installation while the switch extends less than one pitch distance between two screw threads and applying a torque force of 1.5 N.m at 15 kgf.cm and 13 in.lbf. Completion of the installation requires avoiding contact between silicon grease and the stop light switch and hooking up the connector.