OEM 2007 Toyota Solara Yaw Sensor

2007 Toyota Solara Parts Questions & Experts Answers

• Q: How to service and repair the Yaw Sensor on 2007 Toyota Solara?

  A: Begin servicing the Yaw Rate Sensor by checking for drops or body damage while inspecting for foreign substances near the yaw rate sensor bracket to body alignment as well as verifying correct sensor direction. To start this procedure disconnect the console upper rear panel sub-assembly then remove the rear console box assembly. The servicing procedure starts by disconnecting the yaw rate sensor connector and then removing two bolts which secure the yaw rate sensor assembly. The yaw rate sensor assembly should be installed by fastening it with two bolts at 13 N.m torque (127 kgf.cm, 9 ft.lbf) then reconnecting the yaw rate sensor connector. The installation process includes reuniting the rear console box assembly while also adding the console upper rear panel sub-assembly. The last step involves executing the yaw rate sensor zero point calibration while checking the status of both ABS warning light and VSC warning light.