How to install the Yaw Sensor assembly and perform the necessary calibrations on 2008 Toyota Solara?

Proceed with the yaw rate sensor assembly installation by fastening it with two bolts that require a torque limit of 13 Nm (127 kgf-cm, 9 ft-lbf). Attach the yaw rate sensor connector during the installation process. The first step is to install both assembly parts of the rear console box followed by the console upper rear panel sub-assembly. The yaw rate sensor must receive zero point calibration following its installation. You should test both the ABS warning light and VSC warning light for correct operation after installation.

OEM 2008 Toyota Solara Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2008 Toyota Solara Sensor Assembly, Yawrate
Part Number: 89180-33030
$997.01 MSRP: $1461.12
You Save: $464.11 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Part Name Code: 89180
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.6 x 4.2 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89180-33030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Solara Submodels:
- SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS

2008 Toyota Solara Yaw Sensor

Looking for affordable OEM 2008 Toyota Solara Yaw Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Solara Yaw Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Solara Parts Questions & Experts Answers

Q: How to install the Yaw Sensor assembly and perform the necessary calibrations on 2008 Toyota Solara?
A: Proceed with the yaw rate sensor assembly installation by fastening it with two bolts that require a torque limit of 13 Nm (127 kgf-cm, 9 ft-lbf). Attach the yaw rate sensor connector during the installation process. The first step is to install both assembly parts of the rear console box followed by the console upper rear panel sub-assembly. The yaw rate sensor must receive zero point calibration following its installation. You should test both the ABS warning light and VSC warning light for correct operation after installation.