OEM 2007 Toyota Solara Wheel Stud

2007 Toyota Solara Wheel Stud Parts Q&A

• Q: How to service and repair the rear Wheel Stud on 2007 Toyota Solara?

  A: The servicing and repair of the rear wheel stud requires workers to start by removing the rear wheel followed by separating and removing the rear disc brake caliper assembly LH and rear disc. Secure both nuts and washers to the front axle LH wheel stud according to the given illustration. When servicing the front axle LH wheel stud, Special Service Tool: 09628-10011 combined with a screwdriver or equivalent tool should utilize a screwdriver to hold the front axle. A new front axle LH wheel stud needs to be installed with a washer and nut following the provided illustration. After placing a hammer handle or equivalent to hold the hub and bearing assembly you can tighten the nut for the new rear axle LH wheel stud installation. The work procedure involves reinstallation of the rear disc brake followed by the rear disc brake caliper assembly and ending with the rear wheel. The final torque value should be set at 103 Nm (1050 kgf-cm, 76 ft. lbs.).