OEM 2006 Toyota Solara Wheel Stud

2006 Toyota Solara Parts Questions & Experts Answers

• Q: How to service the rear Wheel Stud on 2006 Toyota Solara?

  A: Service of the rear wheel stud starts by taking off the wheel followed by separating the rear disc brake caliper assembly from the left-hand side before removing the rear disc. Two washers along with two nuts must be used to temporarily secure the front axle left wheel stud according to the illustration. Special Service Tool 09628-10011 with a screwdriver or equivalent tool should be used to maintain front axle stability during removal of the front axle left wheel stud. Use a hammer handle along with an equivalent tool to maintain hub and bearing steadiness before installing the new rear axle left wheel stud by tightening the nut. Reinstall the rear disc followed by the rear disc brake caliper assembly on the left-hand side and end the replacement with the rear wheel that requires a torque of 103 Nm (1,050 kgf-cm, 76 ft. lbs.).