My Garage
Cart

OEM 2007 Toyota Solara Shift Cable

Transmission Shift Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Shift Cable found

  • 2007 Toyota Solara Shift Cable - 33820-06280
    2007 Toyota Solara Shift Cable Diagram - 33820-06280
    View related parts
    Product Specifications
    • Other Name: Cable Assembly, Transmission Control
    • Part Name Code: 33820B
    • Item Weight: 2.30 Pounds
    • Item Dimensions: 43.1 x 7.1 x 3.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 33820-06280
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2007 Toyota Solara Submodels:
    • SE, SLE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS

2007 Toyota Solara Shift Cable

Looking for affordable OEM 2007 Toyota Solara Shift Cable? Explore our comprehensive catalogue of genuine 2007 Toyota Solara Shift Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Solara Shift Cable Parts Q&A

  • Q: How to service and repair the floor shift cable transmission control select on 2007 Toyota Solara?
    A: Primarily start the repair sequence of floor shift cable transmission control select by removing the instrument panel safety pad subassembly with the passenger air bag assembly after observing all restraint systems and service precautions. The sequence of work starts with removing the air conditioning radiator assembly and the air bag sensor assembly center. Start by separating the floor shift cable transmission control select by unknotting the clip and washer which detaches the top cable section from the transaxle and then removing the clip and cable from the control cable bracket. First dismantle the select cable from the shift lever retainer by turning the lock and then detach the top of the select cable from the shift lever assembly by removing the clip. Unbolt the two retainer set bolts on the floor then detach the retainer from the grommet before disconnecting the select cable from the grommet for pulling it through the floor hole and retainer. Installing the select cable requires passing it through the floor hole and retainer before connecting it to the grommet then installing the retainer onto the grommet with its three projections properly inserted into all three retainer holes. After tightening the two retainer set bolts to 5.0 Nm (51 kgf-cm, 44 inch lbs.), attach the select cable to the shift lever retainer with the following conditions: make sure the cable outer faces upward and the cable outer lock should project from location A according to the indication label. Install the top end of the select cable onto the shift lever assembly before adding the clip whose serrated edge faces upward then join the select cable to the control cable bracket through a new clip. The last task involves hooking the select cable to the transaxle while you insert both a washer and a clip before replacing the air bag sensor assembly center and air conditioning radiator assembly and instrument panel safety pad subassembly with the passenger air bag assembly.

Related 2007 Toyota Solara Parts