OEM 2008 Toyota Solara Shift Cable

2008 Toyota Solara Parts Questions & Experts Answers

• Q: How to install the U250E AUTOMATIC TRANSAXLE Shift Cable assembly on 2008 Toyota Solara?

  A: The installation process for the U250E AUTOMATIC TRANSAXLE transmission control cable assembly starts by sliding the control cable into the body before implementing the floor shift cable grommet retainer No.2 while making sure its uneven surface points upward and the claws firmly grip the installation. The control cable should attach to the control cable clamp before securing it to the bracket through a new clip. Temporarily fasten the control cable to the control shaft lever using the nut for installation. The floor shift cable must be secured by 2 bolts that need to reach a torque level of 5.0 Nm (51 kgf-cm, 44 in-lbf). Begin by installing the air conditioning radiator assembly after installing the center Air Bag sensor assembly. Check and align the shift lever position before evaluation. You should start by fitting both the intake air resonator sub-assembly and the air cleaner assembly before connecting the battery negative terminal. Finally, perform the initialization process.