Toyota 33820-06280
Shift Control Cable

The first step to remove the shift cable from the U250E AUTOMATIC TRANSAXLE requires disconnecting the battery negative terminal. The first step involves removing the instrument panel safety pad sub-assembly then you must take away the air conditioning radiator assembly. Remove the center Air Bag sensor assembly and the air cleaner assembly and then proceed to the intake air resonator sub-assembly. The removal of two bolts allows disconnecting shift cable grommet retainer No.2. Start with the floor shift cable transmission control shift by unscrewing the nut from the control shaft lever and unbonding the control cable from the control shaft lever before separate the clip from the control cable bracket along with disconnecting the control cable from the control cable clamp and lastly unbinding the floor shift cable from the transmission floor shift assembly. Draw out the body control cable then eliminate shift cable grommet retainer No. 2 from its place.

Remove the clip and washer to separate the top of the shift cable from the transaxle, then remove the clip and shift cable from the control cable bracket.

Connect the control cable to the control cable clamp and attach it to the bracket with a new clip, then temporarily install the control cable to the control shaft lever using the nut.