How to service the ignition coil on 2007 Toyota Sequoia?

Service of the ignition coil starts by disconnecting its connectors with the igniter. The ignition coils require removal by using bolt extraction to pull out each ignition coil component and then repeating the process eight times. Reinstall the ignition coil with igniter after placing it correctly through the bolt followed by a systematic installation of all 8 ignition coils (with igniter) while maintaining 7.5 N.m (76 kgf.cm, 66 in.lbf) of torque. Connectors for the ignition coils (with igniter) should be reinstalled at the completion of the procedure.

OEM 2007 Toyota Sequoia Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2007 Toyota Sequoia Coil, Ignition
Part Number: 90919-02259
$86.26 MSRP: $121.08
You Save: $34.82 (29%)
ADD TO CART
Product Specifications
- Other Name: Direct Ignition Coil; Ignition Coil
- Replaces: 90919-02249, 90080-19027
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.5 x 2.1 x 8.8 inches
- Condition: New
- SKU: 90919-02259
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2007 Toyota Sequoia Ignition Coil

Looking for affordable OEM 2007 Toyota Sequoia Ignition Coil? Explore our comprehensive catalogue of genuine 2007 Toyota Sequoia Ignition Coil. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Sequoia Parts Questions & Experts Answers

Q: How to service the ignition coil on 2007 Toyota Sequoia?
A: Service of the ignition coil starts by disconnecting its connectors with the igniter. The ignition coils require removal by using bolt extraction to pull out each ignition coil component and then repeating the process eight times. Reinstall the ignition coil with igniter after placing it correctly through the bolt followed by a systematic installation of all 8 ignition coils (with igniter) while maintaining 7.5 N.m (76 kgf.cm, 66 in.lbf) of torque. Connectors for the ignition coils (with igniter) should be reinstalled at the completion of the procedure.