×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2007 Toyota RAV4 Yaw Sensor
Yaw Rate Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Yaw Sensor found
2007 Toyota RAV4 Yaw Rate Sensor
Part Number: 89180-42020$1065.53 MSRP: $1561.54You Save: $496.01 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Sensor Assembly, Yawrate
- Part Name Code: 89180
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.5 x 4.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89180-42020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2007 Toyota RAV4 Yaw Sensor
Looking for affordable OEM 2007 Toyota RAV4 Yaw Sensor? Explore our comprehensive catalogue of genuine 2007 Toyota RAV4 Yaw Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Toyota RAV4 Yaw Sensor Parts Q&A
- Q: How to service and repair the Yaw Sensor on 2007 Toyota RAV4?A: Service and repair of the Yaw Rate Sensor starts with disconnecting the negative cable from the battery terminal while allowing at least 90 seconds to pass to avoid triggering Air Bag and seat belt pretensioners. The service starts by taking off the left-side front seat assembly that may be powered or manual then moving to the left-side front door scuff plate. Detach the yaw rate sensor bracket using the bolt before disconnecting its connector and removing two bolts but leave the sensor in place on the bracket. Use two bolts to fix the yaw rate sensor assembly with a torque of 14.5 N.m (148 kgf.cm, 11 ft.lbf) but ensure both that the sensor remains secure and intact before reconnecting the sensor connector. The customer should connect the yaw rate sensor bracket with one bolt secured to 14.5 N.m (148 kgf.cm, 11 ft.lbf). Subsequently, install the front door scuff plate while completing the left front seat assembly assembly. After reconnecting the cable to the negative battery terminal you must perform zero point calibrations of the yaw rate and deceleration sensor and then inspect the signal of the yaw rate sensor.