How to service and repair the rear shock absorber on 2007 Toyota Camry?

The first step to service the rear shock absorber starts with clearing the rear seat cushion assembly followed by headrest assemblies and rear seat back assembly based on the chosen backrest configuration. The next step consists of wheel removal before separating the rear stabilizer link assembly LH through nut removal while keeping the stud stable with a 5 mm hexagon wrench. You should disconnect the rear speed sensor by taking out its two bolts then detach the rear brake flexible hose which runs from the shock absorber to the rear axle carrier. Lift the rear suspension support No. 1 cover by detaching its four claws before loosening the lock nut on the coil spring shock absorber without actual nut removal. Finally remove three upper side and two lower side nuts and bolts. Lower the rear axle carrier and you can remove the two bolts located on the shock absorber's rear lower side. Seize the rear shock absorber with coil spring inside a vise while using aluminum plates before compressing the rear coil spring with Special Service Tool: 09727-30021 (09727-00010, 09727-00021, 09727-00031) without impact wrench usage. Then remove the nut, collar and suspension support assembly. Several compressions and extensions of the rod should be performed to check for unusual resistance or sounds during rear shock absorber inspection. Install the rear No. 1 spring bumper and lower insulator then recharge the compressed rear coil spring which should face its smaller diameter downward. Before applying the lock nut to secure the assembly put the notches of the piston rod with the rear suspension support assembly into proper alignment. The installation of the rear shock absorber with coil spring must be completed on the rear axle carrier by using bolts and nuts while respecting the torque requirements. Reinstall the rear speed sensor before you connect the rear stabilizer link assembly LH and add the rear suspension support No. 1 cover with the vehicle wheel. The last step requires reinstalling rear seat components followed by tests of the ABS speed sensor and adjustments to keep the rear wheel aligned properly. While disposing of shock absorbers, elongate the piston rod then make a hole in the cylinder using appropriate protective gear because metal fragments may appear.

OEM 2007 Toyota Camry Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Shock Absorbers found

View related parts
2007 Toyota Camry Strut, Rear Driver Side
Part Number: 48540-09810
$148.63 MSRP: $210.39
You Save: $61.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Left Suspension Strut; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48540-06490
- Position: Rear Driver Side
- Part Name Code: 48540
- Item Weight: 6.50 Pounds
- Item Dimensions: 26.4 x 6.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-09810
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Camry Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
2007 Toyota Camry Strut, Rear Driver Side
Part Number: 48540-09680
$148.63 MSRP: $210.39
You Save: $61.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Left Suspension Strut; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48540-06410
- Position: Rear Driver Side
- Part Name Code: 48540
- Item Weight: 7.00 Pounds
- Item Dimensions: 25.8 x 6.8 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-09680
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Camry Submodels:
- SE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Toyota Camry Strut, Rear Passenger Side
Part Number: 48530-09N60
$148.63 MSRP: $210.39
You Save: $61.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Right Suspension Strut; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Passenger Side
- Manufacturer Note: MARK 48530-06490
- Position: Rear Passenger Side
- Part Name Code: 48530
- Item Weight: 6.50 Pounds
- Item Dimensions: 26.1 x 6.8 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09N60
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Camry Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
2007 Toyota Camry Strut, Rear Passenger Side
Part Number: 48530-09K90
$148.63 MSRP: $210.39
You Save: $61.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Right Suspension Strut; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Passenger Side
- Manufacturer Note: MARK 48530-06410
- Position: Rear Passenger Side
- Part Name Code: 48530
- Item Weight: 6.80 Pounds
- Item Dimensions: 25.6 x 6.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09K90
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Camry Submodels:
- SE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Toyota Camry Strut, Rear Driver Side
Part Number: 48540-09760
$140.61 MSRP: $199.06
You Save: $58.45 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut; Shock Absorber; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48540-06470
- Position: Rear Driver Side
- Part Name Code: 48540
- Item Weight: 6.70 Pounds
- Item Dimensions: 26.4 x 6.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-09760
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Camry Submodels:
- XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Toyota Camry Strut, Rear Passenger Side
Part Number: 48530-09M20
$140.61 MSRP: $199.06
You Save: $58.45 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut; Shock Absorber; Absorber Assembly, Shock, Rear Passenger Side
- Manufacturer Note: MARK 48530-06470
- Position: Rear Passenger Side
- Part Name Code: 48530
- Item Weight: 6.80 Pounds
- Item Dimensions: 26.4 x 6.5 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09M20
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Camry Submodels:
- XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Toyota Camry Strut, Rear Passenger Side
Part Number: 48530-09K70
$140.61 MSRP: $199.06
You Save: $58.45 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Right Suspension Strut; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Passenger Side
- Manufacturer Note: MARK 48530-06330
- Position: Rear Passenger Side
- Replaces: 48530-89015
- Part Name Code: 48530
- Item Weight: 15.80 Pounds
- Item Dimensions: 31.2 x 20.2 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09K70
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Camry Submodels:
- Base, CE, LE | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Toyota Camry Strut, Rear Driver Side
Part Number: 48540-09660
$137.82 MSRP: $195.10
You Save: $57.28 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Left Suspension Strut; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48540-06330
- Position: Rear Driver Side
- Replaces: 48540-39745
- Part Name Code: 48540
- Item Weight: 15.30 Pounds
- Item Dimensions: 32.9 x 21.0 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-09660
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Camry Submodels:
- Base, CE, LE | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Toyota Camry Strut, Rear Driver Side
Part Number: 48540-39795
$148.63 MSRP: $210.39
You Save: $61.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Left Suspension Strut; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48540-33410
- Position: Rear Driver Side
- Part Name Code: 48540
- Item Weight: 6.70 Pounds
- Item Dimensions: 26.4 x 6.5 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-39795
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Camry Submodels:
- Hybrid, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Toyota Camry Strut, Rear Passenger Side
Part Number: 48530-80370
$148.63 MSRP: $210.39
You Save: $61.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Right Suspension Strut; Complete Strut Kit; Shock Absorber; Absorber Assembly, Shock, Rear Passenger Side
- Manufacturer Note: MARK 48530-33410
- Position: Rear Passenger Side
- Part Name Code: 48530
- Item Weight: 6.70 Pounds
- Item Dimensions: 25.8 x 6.5 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-80370
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Camry Submodels:
- Hybrid, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Toyota Camry Strut, Front Passenger Side
Part Number: 48510-09N10
$125.71 MSRP: $177.96
You Save: $52.25 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Strut, Front Right; Shock Absorber; Absorber Assembly, Shock, Front Passenger Side
- Position: Front Passenger Side
- Part Name Code: 48510
- Item Weight: 12.20 Pounds
- Item Dimensions: 27.1 x 8.3 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09N10
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Camry Submodels:
- SE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS

2007 Toyota Camry Shock Absorber

Looking for affordable OEM 2007 Toyota Camry Shock Absorber? Explore our comprehensive catalogue of genuine 2007 Toyota Camry Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Camry Parts Questions & Experts Answers

Q: How to service and repair the rear shock absorber on 2007 Toyota Camry?
A: The first step to service the rear shock absorber starts with clearing the rear seat cushion assembly followed by headrest assemblies and rear seat back assembly based on the chosen backrest configuration. The next step consists of wheel removal before separating the rear stabilizer link assembly LH through nut removal while keeping the stud stable with a 5 mm hexagon wrench. You should disconnect the rear speed sensor by taking out its two bolts then detach the rear brake flexible hose which runs from the shock absorber to the rear axle carrier. Lift the rear suspension support No. 1 cover by detaching its four claws before loosening the lock nut on the coil spring shock absorber without actual nut removal. Finally remove three upper side and two lower side nuts and bolts. Lower the rear axle carrier and you can remove the two bolts located on the shock absorber's rear lower side. Seize the rear shock absorber with coil spring inside a vise while using aluminum plates before compressing the rear coil spring with Special Service Tool: 09727-30021 (09727-00010, 09727-00021, 09727-00031) without impact wrench usage. Then remove the nut, collar and suspension support assembly. Several compressions and extensions of the rod should be performed to check for unusual resistance or sounds during rear shock absorber inspection. Install the rear No. 1 spring bumper and lower insulator then recharge the compressed rear coil spring which should face its smaller diameter downward. Before applying the lock nut to secure the assembly put the notches of the piston rod with the rear suspension support assembly into proper alignment. The installation of the rear shock absorber with coil spring must be completed on the rear axle carrier by using bolts and nuts while respecting the torque requirements. Reinstall the rear speed sensor before you connect the rear stabilizer link assembly LH and add the rear suspension support No. 1 cover with the vehicle wheel. The last step requires reinstalling rear seat components followed by tests of the ABS speed sensor and adjustments to keep the rear wheel aligned properly. While disposing of shock absorbers, elongate the piston rod then make a hole in the cylinder using appropriate protective gear because metal fragments may appear.

Related 2007 Toyota Camry Parts

Alternate Year Models

2006 Toyota Camry Shock Absorber 2008 Toyota Camry Shock Absorber