Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following 2006 Toyota Sequoia Submodels:
Limited, SR5 | 8 Cyl 4.7 L GAS
2006 Toyota Sequoia TPMS Sensor
Looking for affordable OEM 2006 Toyota Sequoia TPMS Sensor? Explore our comprehensive catalogue of genuine 2006 Toyota Sequoia TPMS Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2006 Toyota Sequoia Parts Questions & Experts Answers
Q: How to service and repair the TPMS Sensor and Transmitter on 2006 Toyota Sequoia?
A: members need to start servicing or repairing Tire Pressure Warning Valve and Transmitter by removing front and rear tires before moving onto the tire pressure monitor valve. Remove the air from the tire through valve core removal before unthreading the valve sub-assembly nut and washer which allows the sensor to pass inside the tire. The shoe tool of the tire remover should be used to unhook the bead so the sensor won't get harmed. Start with removing the upper bead before extracting the sensor then removing the lower bead. Check the inner grommet of the valve sub-assembly for damage before replacing it with the washer and nut when necessary. During installation mount the tire pressure monitor valve within the valve installation hole so that no defect or external matter becomes visible. Use the washer to install it followed by torquing the nut until it reaches 4.0 Nm (41 kgf-cm, 35 ft. lbs.) while also checking that the washer area and nut are free of debris. The tyre pressure should be sufficiently inflated before retightening the valve nut to its specified torque while using soapy water for leak detection. The wheel disc should be placed on the mounting machine for installing lower tire beads before placing the sensor properly to minimize interference and finishing with upper bead installation without clamping. The wheel installation must use 103 Nm (1050 kgf-cm, 76 ft. lbs.) torque for front and rear wheels followed by checking the tire condition before registering the transmitted ID and validating the tire pressure warning system. Before discarding the device cut the power connections from the battery to base board base and then remove it from the tire monitor sub-assembly by pulling off its protective cover according to disposal regulations for lithium batteries.