How to service the rear upper control arm on 2006 Toyota Sequoia?

The service of the rear upper control arm starts by taking off the wheel and performing a torque of 110 Nm (1,150 kgf-cm, 83 ft. lbs.). Position the axle housing under a jack while you detach the speed sensor wire harness and uninstall its bolt along with the brake line bracket applying 28 Nm (286 kgf-cm, 21 ft. lbs.) torque. A torque wrench applied to the hardware must be set to 140 Nm (1,428 kgf-cm, 103 ft. lbs.) before removing the two nuts and washers together with the bolts and upper control arm. After stabilizing the suspension conduct installation by following the reverse order of removal and always tighten the nuts.

OEM 2006 Toyota Sequoia Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Control Arms found

View related parts
2006 Toyota Sequoia Lower Control Arm, Driver Side
Part Number: 48069-34040
$233.28 MSRP: $333.07
You Save: $99.79 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Lower; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm; Control Arm
- Position: Lower Driver Side
- Part Name Code: 48069
- Item Weight: 21.00 Pounds
- Item Dimensions: 22.9 x 6.1 x 17.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-34040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Lower Control Arm, Passenger Side
Part Number: 48068-34040
$238.46 MSRP: $340.47
You Save: $102.01 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right Lower; Arm Sub-Assembly, Front Suspension, Lower Passenger Side; Suspension Control Arm; Control Arm
- Position: Passenger Side
- Part Name Code: 48068
- Item Weight: 21.00 Pounds
- Item Dimensions: 22.7 x 6.4 x 18.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-34040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Upper Control Arm, Driver Side
Part Number: 48630-34010
$218.67 MSRP: $312.21
You Save: $93.54 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Left Upper; Arm Assembly, Front Suspension, Upper Driver Side; Suspension Control Arm; Control Arm
- Position: Upper Driver Side
- Part Name Code: 48630
- Item Weight: 5.90 Pounds
- Item Dimensions: 16.1 x 3.5 x 12.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48630-34010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2006 Toyota Sequoia Upper Control Arm, Passenger Side
Part Number: 48610-34010
$218.67 MSRP: $312.21
You Save: $93.54 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Right Upper; Arm Assembly, Front Suspension Upper, Passenger Side; Suspension Control Arm; Control Arm
- Position: Passenger Side
- Part Name Code: 48610
- Item Weight: 6.00 Pounds
- Item Dimensions: 16.1 x 3.6 x 12.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48610-34010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2006 Toyota Sequoia Control Arm

Looking for affordable OEM 2006 Toyota Sequoia Control Arm? Explore our comprehensive catalogue of genuine 2006 Toyota Sequoia Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Sequoia Parts Questions & Experts Answers

Q: How to service the rear upper control arm on 2006 Toyota Sequoia?
A: The service of the rear upper control arm starts by taking off the wheel and performing a torque of 110 Nm (1,150 kgf-cm, 83 ft. lbs.). Position the axle housing under a jack while you detach the speed sensor wire harness and uninstall its bolt along with the brake line bracket applying 28 Nm (286 kgf-cm, 21 ft. lbs.) torque. A torque wrench applied to the hardware must be set to 140 Nm (1,428 kgf-cm, 103 ft. lbs.) before removing the two nuts and washers together with the bolts and upper control arm. After stabilizing the suspension conduct installation by following the reverse order of removal and always tighten the nuts.