×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2006 Toyota RAV4 Oil Filter
Engine Oil filter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Oil Filters found
Product Specifications- Other Name: Filter, Oil; Engine Oil Filter; Filter Change Maintenance Kit
- Replaces: 08922-02001, 08922-02002, 90080-91210, 90915-10004, 90915-CA001, 90915-YZZA1, 90915-03004, 90915-10002, 90915-TA002
- Item Weight: 0.80 Pounds
- Item Dimensions: 21.1 x 4.8 x 4.8 inches
- Condition: New
- SKU: 90915-YZZF1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Product Specifications- Other Name: Replaceable Element; Engine Oil Filter Element; Filter Change Maintenance Kit; Engine Oil Filter; Filter Element; Element
- Replaces: 04152-31050, 04152-38010, 04152-31060
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.4 x 3.4 x 5.3 inches
- Condition: New
- SKU: 04152-YZZA5
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Product Specifications- Other Name: Filter Change Maintenance Kit; Engine Oil Filter; Oil Filter
- Replaces: 04152-0V010, 04152-31110, 04152-31090
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.5 x 3.4 x 4.5 inches
- Condition: New
- SKU: 04152-YZZA1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2006 Toyota RAV4 Oil Filter
Looking for affordable OEM 2006 Toyota RAV4 Oil Filter? Explore our comprehensive catalogue of genuine 2006 Toyota RAV4 Oil Filter. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2006 Toyota RAV4 Oil Filter Parts Q&A
- Q: How to replace the oil filter on 2006 Toyota RAV4?A: It is critical before installing a new oil filter to protect your skin from prolonged contact with motor oil because skin irritation together with dermatitis can develop and the oil may contain dangerous impurities. You should wear protective clothing and gloves before conducting the task and wash your skin entirely once you finish. We should take used oil and filters to appropriate disposal areas. Start by pulling off the engine under cover at No. 1 position followed by draining engine oil through unfastening the oil filler cap and oil drain plug while collecting oil into a suitable receptacle. To remove the oil filter sub-assembly you should use Special Service Tool: 09228-06501. Installation begins with cleaning the oil filter seat while applying clean engine oil to the gasket of a new filter before tightening it by hand until the gasket reaches the seat. Use Special Service Tool: 09228-06501 to tighten the oil filter however satellite the gauge allows either hand tightening it 3/4 turn or applying torque to 17.2 Nm (175 kgf-cm, 13 ft. lbs.) or limit the tool. Following the cleaning process install the drained oil plug using a new gasket which needs to be tightened to 40 Nm (408 kgf-cm, 30 ft. lbs.) before adding standard oil amounts and replacing the oil filler cap. Before installation of the No. 1 engine under cover you should inspect for engine oil leaks.