OEM 2005 Toyota RAV4 Oil Filter

2005 Toyota RAV4 Parts Questions & Experts Answers

• Q: How to replace the Oil Filter on 2005 Toyota RAV4?

  A: The task begins by taking out the under engine cover before continuing. Engine oil drainage becomes possible by disassembling the oil filter cap and oil drain plug for the oil to flow into a designated container. To perform the oil filter replacement task make use of Special Service Tool: 09228-06501 to uninstall the previous oil filter before checking and cleaning the oil filter attachment area. Install the new oil filter by first applying clean engine oil to its gasket then slowly screw it into proper position before tightening it until it reaches the seat. Special Service Tool: 09228-06501 should be employed to incrementally tighten the component by a total of 3/4 turn. Pour fresh engine oil first followed by the installation of an oil drain plug with new gasket and torquing it to 24.5 Nm (250 kgf-cm, 18 ft. lbs.). Complete the procedure by installing the new oil filter cap. Engine start-up will allow you to inspect for oil leaks followed by center engine under cover installation before performing another engine oil level check. When handling used oil users need protective gear including gloves and protective clothing during this task since they must properly discard the used oil at proper sites for waste disposal.