×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM Toyota RAV4 Oil Filter
Engine Oil filter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Oil Filters found
Toyota RAV4 Oil Filter
Part Number: 90915-YZZN1$4.27 MSRP: $5.97You Save: $1.70 (29%)Ships in 1-3 Business Days
Toyota RAV4 Oil Filter
If you're thinking about purchasing OEM parts for your Toyota RAV4, our website is your one-stop destination. We stock an extensive selection of genuine Toyota RAV4 Oil Filter at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Toyota RAV4 Oil Filter Parts Questions & Experts Answers
- Q: How to replace the oil filter on Toyota RAV4?A: It is critical before installing a new oil filter to protect your skin from prolonged contact with motor oil because skin irritation together with dermatitis can develop and the oil may contain dangerous impurities. You should wear protective clothing and gloves before conducting the task and wash your skin entirely once you finish. We should take used oil and filters to appropriate disposal areas. Start by pulling off the engine under cover at No. 1 position followed by draining engine oil through unfastening the oil filler cap and oil drain plug while collecting oil into a suitable receptacle. To remove the oil filter sub-assembly you should use Special Service Tool: 09228-06501. Installation begins with cleaning the oil filter seat while applying clean engine oil to the gasket of a new filter before tightening it by hand until the gasket reaches the seat. Use Special Service Tool: 09228-06501 to tighten the oil filter however satellite the gauge allows either hand tightening it 3/4 turn or applying torque to 17.2 Nm (175 kgf-cm, 13 ft. lbs.) or limit the tool. Following the cleaning process install the drained oil plug using a new gasket which needs to be tightened to 40 Nm (408 kgf-cm, 30 ft. lbs.) before adding standard oil amounts and replacing the oil filler cap. Before installation of the No. 1 engine under cover you should inspect for engine oil leaks.
