OEM 2004 Toyota RAV4 Oil Filter

2004 Toyota RAV4 Parts Questions & Experts Answers

• Q: How to replace the Oil Filter on 2004 Toyota RAV4?

  A: Start by taking off the engine under cover and drain engine oil through the removal of the oil filter cap and the oil drain plug while an oil container receives the fluid. The next procedure requires Special Service Tool: 09228-06501 to eliminate the old oil filter but you need to inspect and clean the surface before installing a new filter. Screwing the new oil filter in place should be done until the gasket makes contact with its seat after applying engine oil to the new filter gasket and checking that the new filter matches the old one for part number. Secure the component an additional 3/4 turn using Special Service Tool: 09228-06501. The procedure requires you to first insert a new gasket in the drain plug before torquing it to 24.5 Nm (250 kgf-cm, 18 ft. lbs.). You must proceed by filling the engine with fresh engine oil and installing the oil filter cap. You should begin with engine start then look for oil leakage before you reinstall the center engine under cover while performing another engine oil level check. It is necessary to take safety precautions when working with oil because you should always wear protective gear along with gloves. You should direct used oil and filters to proper disposal areas.