×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2006 Scion xA Clutch Slave Cylinder
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Clutch Slave Cylinder found
Product Specifications- Other Name: Cylinder Assembly, Clutch Release With Bearing; Clutch Slave Cylinder
- Replaces: 31470-52011, 31470-52010
- Item Weight: 1.40 Pounds
- Item Dimensions: 3.7 x 2.8 x 5.5 inches
- Condition: New
- SKU: 31470-12200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2006 Scion xA Clutch Slave Cylinder
Looking for affordable OEM 2006 Scion xA Clutch Slave Cylinder? Explore our comprehensive catalogue of genuine 2006 Scion xA Clutch Slave Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2006 Scion xA Clutch Slave Cylinder Parts Q&A
- Q: How to service and repair the Clutch Slave Cylinder on 2006 Scion xA?A: The Clutch Slave Cylinder requires servicing through disconnection of the clutch release cylinder from the flexible hose tube using Special Service Tool: 09023-00101 while fluid prevents leakage into a catch container. Second you should remove the clutch release cylinder assembly through bolt extraction of the 2 bolts. The service process for Clutch Slave Cylinder starts with union bolt removal followed by taking out union along with 2 gaskets before extracting boot and push rod and piston and spring from the cylinder body keeping the cylinder interior free from damage. To proceed with the next step remove the cap that protects the bleeder plug. The reassembly process requires installation of the bleeder plug first with 8.4 Nm (85 kgf-cm, 74 inch lbs.), and the subsequent assembly of the clutch release cylinder kit by applying lithium soap base glycol grease on indicated surfaces. Attach the clutch release union after fitting the piston as well as push rod and boot onto the cylinder body together with the 2 new gaskets. Torque up to 25 Nm (250 kgf-cm, 18 ft. lbs.) with an installation angle between 0 degrees and 3 degrees. The installation requires torqueing the two bolts for the clutch release cylinder assembly to 12 Nm (120 kgf-cm, 9 ft. lbs.) then using Special Service Tool: 09023-00101 to torque the clutch release cylinder to flexible hose tube connection at 15 Nm (155 kgf-cm, 11 ft. lbs.). The process ends with bleeding the clutch system and checking for fluid leakage.