How to service and repair the Transmission Speed Sensor on 2005 Toyota Sequoia?

Service and repair operations for the Transmission Speed Sensor start with disconnecting its No. 1 vehicle speed sensor connector and removing the sensor by unbolted it. The first step in disassembling No. 1 vehicle speed sensor involves removing its O-ring from the speedometer driven gear assembly followed by the clip and speedometer driven gear from the speedometer driven gear sleeve. Renew the O-ring with ATF then install it to the speedometer driven gear assembly before mounting the speedometer driven gear along with clip to the speedometer driven gear sleeve. It is essential to install the No. 1 vehicle speed sensor with its bolt tightened to 9.8 Nm (100 kgf-cm, 86 inch lbs.) for A750E and 11.5 Nm (117 kgf-cm, 8 ft. lbs.) for A750F. Proceed with the installation by plugging in the No. 1 vehicle speed sensor connector before disconnecting the speed sensor NT and SP2 connector followed by removing the speed sensors NT and SP2 through the process of unlatching the two bolts and two O-ring removal. The technical team should apply ATF to two new O-rings before installing them onto the speed sensors NT and SP2. Then install the speed sensors NT and SP2 with the 2 bolts torqued to 5.4 Nm (55 kgf-cm, 48 inch lbs.) followed by connecting the speed sensor NT and SP2 connector.

OEM 2005 Toyota Sequoia Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Speed Sensors found

View related parts
2005 Toyota Sequoia ABS Sensor, Front Driver Side
Part Number: 89543-0C010
$271.67 MSRP: $387.88
You Save: $116.21 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left; Speed Sensor; Front Speed Sensor; Sensor, Speed, Front Driver Side; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Part Name Code: 89543
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.6 x 6.7 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89543-0C010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Sequoia ABS Sensor, Front Passenger Side
Part Number: 89542-0C010
$271.67 MSRP: $387.88
You Save: $116.21 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right; Speed Sensor; Front Speed Sensor; Sensor, Speed, Front Passenger Side; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Part Name Code: 89542
- Item Weight: 1.30 Pounds
- Item Dimensions: 9.9 x 6.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89542-0C010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Sequoia ABS Sensor, Rear Driver Side
Part Number: 89546-0C020
$272.13 MSRP: $388.54
You Save: $116.41 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Rear Left-Hand; ABS Wheel Speed Sensor, Rear Left; Rear Speed Sensor; Sensor, Speed, Rear Driver Side
- Position: Rear Driver Side
- Replaces: 89546-0C010
- Part Name Code: 89546
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.3 x 6.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89546-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2005 Toyota Sequoia ABS Sensor, Rear Passenger Side
Part Number: 89545-0C020
$272.13 MSRP: $388.54
You Save: $116.41 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Rear Right-Hand; ABS Wheel Speed Sensor, Rear Right; Rear Speed Sensor; Sensor, Speed, Rear Passenger Side
- Position: Rear Passenger Side
- Replaces: 89545-0C010
- Part Name Code: 89545
- Item Weight: 0.50 Pounds
- Item Dimensions: 10.3 x 6.6 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89545-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2005 Toyota Sequoia Speed Sensor

Looking for affordable OEM 2005 Toyota Sequoia Speed Sensor? Explore our comprehensive catalogue of genuine 2005 Toyota Sequoia Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota Sequoia Parts Questions & Experts Answers

Q: How to service and repair the Transmission Speed Sensor on 2005 Toyota Sequoia?
A: Service and repair operations for the Transmission Speed Sensor start with disconnecting its No. 1 vehicle speed sensor connector and removing the sensor by unbolted it. The first step in disassembling No. 1 vehicle speed sensor involves removing its O-ring from the speedometer driven gear assembly followed by the clip and speedometer driven gear from the speedometer driven gear sleeve. Renew the O-ring with ATF then install it to the speedometer driven gear assembly before mounting the speedometer driven gear along with clip to the speedometer driven gear sleeve. It is essential to install the No. 1 vehicle speed sensor with its bolt tightened to 9.8 Nm (100 kgf-cm, 86 inch lbs.) for A750E and 11.5 Nm (117 kgf-cm, 8 ft. lbs.) for A750F. Proceed with the installation by plugging in the No. 1 vehicle speed sensor connector before disconnecting the speed sensor NT and SP2 connector followed by removing the speed sensors NT and SP2 through the process of unlatching the two bolts and two O-ring removal. The technical team should apply ATF to two new O-rings before installing them onto the speed sensors NT and SP2. Then install the speed sensors NT and SP2 with the 2 bolts torqued to 5.4 Nm (55 kgf-cm, 48 inch lbs.) followed by connecting the speed sensor NT and SP2 connector.