Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2005 Toyota Prius Submodels:
Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
2005 Toyota Prius Wheel Bearing
Looking for affordable OEM 2005 Toyota Prius Wheel Bearing? Explore our comprehensive catalogue of genuine 2005 Toyota Prius Wheel Bearing. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2005 Toyota Prius Parts Questions & Experts Answers
Q: How to replace the rear axle hub and Wheel Bearing assembly on the LH side on 2005 Toyota Prius?
A: The replacement process for the LH side rear axle hub and bearing assembly starts with removing the rear wheel together with the rear brake drum sub-assembly. Before proceeding with the operation disconnect the skid control sensor connector while you protect both areas from entering foreign material. Looseness of the 4 bolts allows for the rear axle hub and bearing assembly LH to be removed. The new rear axle hub and bearing assembly LH should be installed onto the axle beam assembly by using the 4 bolts torqued to 61 Nm (622 kgf-cm, 45 ft. lbs.). Next check both the skid control sensor connector reattachment as well as the axle hub bearing for any signs of looseness and runout. Position back the rear brake drum sub-assembly and rear wheel following the torque specifications of 103 Nm (1,050 kgf-cm, 76 ft. lbs.). As the last step inspect the rear wheel alignment while also checking the ABS speed sensor signal.