Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2004 Toyota Prius Submodels:
Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
2004 Toyota Prius Wheel Bearing
Looking for affordable OEM 2004 Toyota Prius Wheel Bearing? Explore our comprehensive catalogue of genuine 2004 Toyota Prius Wheel Bearing. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2004 Toyota Prius Parts Questions & Experts Answers
Q: How to replace the REAR AXLE HUB & Wheel Bearing ASSY LH on 2004 Toyota Prius?
A: Begin the replacement of REAR AXLE HUB & BEARING ASSY LH by disconnecting the rear wheel and the rear brake drum sub-assy. Begin by disconnecting the skid control sensor connector while being cautious of any foreign substances which could encroach on the connector or its installation area. The four bolts need to be removed to detach the rear axle hub and bearing assembly on the left-hand side. Fit the rear axle hub & bearing assy LH into the position on the axle beam assy before tightening its 4 bolts to 61 Nm (622 kgf-cm, 45 ft. lbs.). Connect the skid control sensor connector before conducting a check for loose or runout conditions in the axle hub bearing. Finally install the rear brake drum sub-assy together with the rear wheel and torque wheel bolts to 103 Nm (1,050 kgf-cm, 76 ft. lbs.). The wheel alignment of the rear should be checked while inspecting the speed sensor signal of the ABS.