Other Name: Rubber, Wiper Insert; Wiper Blade; Rubber, Rear Wiper
Part Name Code: 85214R
Item Weight: 0.40 Pounds
Material: Rubber
Item Dimensions: 13.4 x 11.1 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85214-22440
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2005 Toyota 4Runner Submodels:
Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
2005 Toyota 4Runner Wiper Blade
Looking for affordable OEM 2005 Toyota 4Runner Wiper Blade? Explore our comprehensive catalogue of genuine 2005 Toyota 4Runner Wiper Blade. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2005 Toyota 4Runner Parts Questions & Experts Answers
Q: How to replace the rear Wiper Blade on 2005 Toyota 4Runner?
A: You can begin the rear wiper rubber replacement by elevating the blade to hear a click sound that will disconnect the claw. During this step you should be cautious not to damage the claw. Pull the rear wiper blade directly to left along the wiper arm without bending the arm. Push the rear wiper from the middle region rather than from the edge to lift the rubber easily for replacement purposes while paying attention to avoid blade claw damage or deformation of the backing plates. Take the 2 wiper rubber backing plates and install them on the rear wiper rubber while keeping the curvature direction appropriate. Insert the rear wiper rubber from the claw at the middle of the rear wiper blade into the rear end position before it passes through both the rear end side claw until it extends from the rear end stopper and through the front tip side claw.