Other Name: Rubber, Wiper Insert; Wiper Blade; Rubber, Rear Wiper
Part Name Code: 85214R
Item Weight: 0.40 Pounds
Material: Rubber
Item Dimensions: 13.4 x 11.1 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85214-22440
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2004 Toyota 4Runner Submodels:
Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
2004 Toyota 4Runner Wiper Blade
Looking for affordable OEM 2004 Toyota 4Runner Wiper Blade? Explore our comprehensive catalogue of genuine 2004 Toyota 4Runner Wiper Blade. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2004 Toyota 4Runner Wiper Blade Parts Q&A
Q: How to replace the rear Wiper Blade on 2004 Toyota 4Runner?
A: The first step in replacing rear wiper rubber requires you to raise the blade until the claw makes a click sound while being cautious about damaging the fixing mechanism. Slowly pull the rear wiper blade from the wiper arm to the left side while maintaining an open position of the arm. You should position the rear wiper so its rear rubber extension sticks past the blade stopper but avoid strong force that could affect the backing plates or damage the blade claw by using the middle area to lift the rubber for better access when removing it. Install the 2 wiper rubber backing plates on the rear wiper rubber with proper curvature alignment. Place and guide the rear wiper rubber from the middle of the rear blade claw into the rear position of the wiper blade and proceed with putting it through both side claws until it extends from the rear stopper to the front tip.