My Garage
Cart

OEM 2005 Toyota 4Runner Windshield

Glass Windshield
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Windshields found

  • 2005 Toyota 4Runner Windshield - 56101-35020
    2005 Toyota 4Runner Windshield Diagram - 56101-35020
    View related parts

    2005 Toyota 4Runner Windshield, Front

    Part Number: 56101-35020
    $508.70 MSRP: $745.50
    You Save: $236.80 (32%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Glass Sub-Assembly, Windshield; Windshield Glass, Front; Glass, Windshield
    • Position: Front
    • Part Name Code: 56111
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 56101-35020
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2005 Toyota 4Runner Submodels:
    • Limited | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
  • 2005 Toyota 4Runner Windshield - 56101-35050
    2005 Toyota 4Runner Windshield Diagram - 56101-35050
    View related parts

    2005 Toyota 4Runner Windshield, Front

    Part Number: 56101-35050
    $508.70 MSRP: $745.50
    You Save: $236.80 (32%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Glass Sub-Assembly, Windshield; Windshield Glass, Front; Glass, Windshield
    • Manufacturer Note: *LAM,T=4.56,GREEN
    • Position: Front
    • Part Name Code: 56111
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 56101-35050
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2005 Toyota 4Runner Submodels:
    • Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2005 Toyota 4Runner Windshield

Looking for affordable OEM 2005 Toyota 4Runner Windshield? Explore our comprehensive catalogue of genuine 2005 Toyota 4Runner Windshield. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota 4Runner Parts Questions & Experts Answers

  • Q: How to replace the windshield glass on 2005 Toyota 4Runner?
    A: The windshield glass replacement starts with disassembly of the roof headlining assembly through stepwise removal of front door Weather Strips (LH and RH), assist grips and front pillar garnishes (LH and RH) and visor assemblies (LH and RH), then taking off the visor holders and roof console box assembly before lastly removing the roof headlining assembly. The windshield glass replacement requires two steps which start with front wiper arm head cap removal and wiper arm (LH and RH) detachment along with the front fender to cowl side seal separation (LH and RH) and the cowl top ventilator louver sub-assembly along with inner rear view mirror assembly elimination. Cut off the windshield mouldings (outside LH, outside RH, and outer upper) from the vehicle body after careful discretion to prevent damage. To remove the windshield glass use piano wire which passes between glass and body from inside and connect both ends to wooden blocks while applying tape for scratch prevention. The piano wire enables cutting the adhesive before dislodging stoppers so a suction rubber can extract the glass while keeping maximum adhesive residue on the body's surface. Wash the windshield glass first by removing broken stoppers along with dam and adhesive and clean the glass edge area with white gasoline at a distance from the window surface. After 3-minute drying time for Primer G applied to stopper No.2 you can install two new stopper No.2 units onto the glass. Proceed with the windshield glass stopper No.1 application onto the body followed by installing the window glass adhesive dam which also needs to have Primer G applied. Afterward install the windshield moulding outer upper by applying Primer G to the glass's edge and contact surface. Before putting the windshield glass in place, clean and mold the vehicle body contact area while using a suction rubber to position the glass before checking alignment with reference points before removing it. Primer M must be applied to exposed body surfaces while Primer G should be used on glass edges. Wait at least three minutes before continuing with the installation. Apply adhesive (Part No. 08850-00801 or equivalent) on the glass surface before installing it while aligning reference marks and pressing softly on the edge. Regular inspections after installation should be conducted to check for leaks then seal any breaches using auto glass sealer maintaining caution before driving the vehicle when adhesive full curing is complete.

Related 2005 Toyota 4Runner Parts