Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2004 Toyota Tundra Submodels:
Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
2004 Toyota Tundra Speed Sensor
Looking for affordable OEM 2004 Toyota Tundra Speed Sensor? Explore our comprehensive catalogue of genuine 2004 Toyota Tundra Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2004 Toyota Tundra Parts Questions & Experts Answers
Q: How to service the rear speed sensor on 2004 Toyota Tundra?
A: Service of the rear speed sensor starts by disconnecting its connector. The speed sensor can be removed after dissembling the 2 clamp bolts, clamp nut, and 5 resin clips which keep the sensor wire harness attached to the axle and fuel tank by applying 13 Nm (130 kgf-cm, 9 ft. lbs.) torque. The installation requires new resin clips which need proper positioning at the same angle used for removed clips. The bolt and speed sensor should be taken out from the axle carrier while using an 8.0 Nm (82 kgf-cm, 71 inch lbs.) torque. After finishing the installation check the speed sensor signal while following installation steps in the opposite order of removal.