×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2004 Toyota Sienna Drive Belt
Serpentine Belt- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Drive Belts found
2004 Toyota Sienna Belt, V (Cooler Compressor To Crankshaft Pulley)
Part Number: 99366-31040$26.76 MSRP: $37.25You Save: $10.49 (29%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Belt, V-Ribbed; Accessory Drive Belt; Serpentine Belt
- Replaces: 99366-21040-83, 99366-21040, 99366-D1040, 90080-91147
- Part Name Code: 88310A
- Item Weight: 0.70 Pounds
- Item Dimensions: 10.2 x 4.2 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 99366-31040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2004 Toyota Sienna Power Steering Belt
Part Number: 90080-91212$16.00 MSRP: $22.27You Save: $6.27 (29%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Belt, V-Ribbed; Accessory Drive Belt; Serpentine Belt Drive Kit; Serpentine Belt; V-Belt; Belt, V(For Vane Pump); Drive Belt
- Manufacturer Note: L=880
- Replaces: 90080-91088, 99364-90880, 90080-91088-83
- Part Name Code: 44310A
- Item Weight: 0.60 Pounds
- Item Dimensions: 16.0 x 4.3 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-91212
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2004 Toyota Sienna Drive Belt
Looking for affordable OEM 2004 Toyota Sienna Drive Belt? Explore our comprehensive catalogue of genuine 2004 Toyota Sienna Drive Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2004 Toyota Sienna Drive Belt Parts Q&A
- Q: How to replace the Drive Belt No.1 for the cooler compressor to crankshaft pulley on 2004 Toyota Sienna?A: The procedure for changing V (cooler compressor to crankshaft pulley) belt No.1 starts by loosening bolt C and bolt A and bolt B before belt removal. The replacement of the new belt should be quickly installed following the shown illustrations. You should adjust bolt B to achieve drive belt tension that reaches 165 plus or minus 27 lbf for new belts that remain on the engine for less than 5 minutes and 88 plus or minus 22 lbf for used belts that operate for 5 minutes and beyond. Look for proper installation of the drive belt inside the ribbed belt grooves. The last step requires tightening bolt A to 17.5 Nm (178 kgf.cm, 12 ft.lbf) torque and bolt C to 58 Nm (591 kgf.cm, 43 ft.lbf).