Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
Position: Front
Item Weight: 0.60 Pounds
Item Dimensions: 4.3 x 2.5 x 2.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89860-47040
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2004 Toyota Prius Submodels:
Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
Other Name: Sensor, Seat Position; Seat Track Position Sensor, Front Left; Air Bag Seat Sensor Mat, Front Left; Air Bag Sensor; Occupant Sensor; Discriminating Sensor; Sensor, Seat Position Air Bag
Position: Front Driver Side
Part Name Code: 89178A
Item Weight: 0.50 Pounds
Item Dimensions: 2.2 x 1.6 x 1.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89178-33020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2004 Toyota Prius Submodels:
Base | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
2004 Toyota Prius Air Bag Sensor
Looking for affordable OEM 2004 Toyota Prius Air Bag Sensor? Explore our comprehensive catalogue of genuine 2004 Toyota Prius Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2004 Toyota Prius Parts Questions & Experts Answers
Q: How to replace the Side Air Bag Sensor Assy on both the RH and LH sides on 2004 Toyota Prius?
A: The steps to replace the Side Air Bag Sensor Assy apply equally to the RH and LH sides where the following instructions focus on the LH side procedures. The repair procedure starts by disconnecting the battery negative terminal followed by removal of front and rear door scuff plates and next taking off front and rear door opening trim Weather Strips and the center pillar garnish lower. The front seat outer belt assy together with side Air Bag sensor assy requires removal after disconnecting its connector and unscrewing both 2 nuts. The procedure to install the new side Air Bag sensor assy starts by turning off the power switch and disconnecting the battery negative terminal for at least 90 seconds before beginning the work. Secure the sensor through two installed nuts by tightening them to 9.0 Nm. Manufacturers recommend substituting the sensor if it suffers from damage or has experienced drops. The SRS wiring should avoid interfering with adjacent components and must not be pinched. Verify that any loose motion in the sensor attachment then restore power connection to the sensor before reattaching the outer front seat belt assembly and battery negative reconnect. For initialization you must follow the given procedures after battery reconnection then verify the SRS warning light.