How to replace the Air Bag Control Module on 2004 Toyota Prius?

The replacement of the Air Bag Control Module starts by disconnecting the battery negative terminal followed by removing both the instrument panel finish panel lower center and the air duct rear No.3. First disconnect the holder with connectors which leads to the removal of three bolts securing the ECU. Maintenance of the new Air Bag ECU assy begins by turning off the power switch and disconnecting the battery negative terminal for 90 seconds minimum before manual installation. Follow a torque sequence of 17.5 Nm when affixing the ECU in place with three bolts. Any damage or drop of the Air Bag ECU assy makes it necessary to perform a replacement. The SRS wiring should be kept clear from contact with other components during installation while checking that all installation parts remain tight. The holder with connectors needs to be reconnected to the Air Bag ECU assy while ensuring the water-proof sheet is in its proper position. The process ends by following battery terminal reconnect procedures and initialization methods from the table then inspecting the SRS warning light.

OEM 2004 Toyota Prius Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Air Bag Control Modules found

View related parts
2004 Toyota Prius Control Module
Part Number: 89170-47070
$395.08 MSRP: $497.33
You Save: $102.25 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Control Module; Air Bag Sensor; Diagnostic Unit; Center Sensor
- Manufacturer Note: SRS AIR BAG-W(DRIVER&PASSENGER&SIDE&CURTAIN SHIELD)
- Part Name Code: 89170
- Item Weight: 2.20 Pounds
- Item Dimensions: 9.3 x 9.2 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89170-47070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2004 Toyota Prius Diagnostic Unit
Part Number: 89170-47360
$279.55 MSRP: $342.84
You Save: $63.29 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Control Module; Air Bag Sensor; Center Sensor
- Part Name Code: 89170
- Item Weight: 2.10 Pounds
- Item Dimensions: 8.9 x 9.1 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89170-47360
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Prius Submodels:
- Base | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2004 Toyota Prius Diagnostic Unit
Part Number: 89170-47380
$394.40 MSRP: $496.47
You Save: $102.07 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Control Module; Air Bag Sensor; Center Sensor
- Manufacturer Note: SRS AIR BAG-DRIVER & PASSENGER & SIDE & CUTAIN
- Part Name Code: 89170
- Item Weight: 2.20 Pounds
- Item Dimensions: 9.0 x 9.2 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89170-47380
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Prius Submodels:
- Base | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)

2004 Toyota Prius Air Bag Control Module

Looking for affordable OEM 2004 Toyota Prius Air Bag Control Module? Explore our comprehensive catalogue of genuine 2004 Toyota Prius Air Bag Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2004 Toyota Prius Parts Questions & Experts Answers

Q: How to replace the Air Bag Control Module on 2004 Toyota Prius?
A: The replacement of the Air Bag Control Module starts by disconnecting the battery negative terminal followed by removing both the instrument panel finish panel lower center and the air duct rear No.3. First disconnect the holder with connectors which leads to the removal of three bolts securing the ECU. Maintenance of the new Air Bag ECU assy begins by turning off the power switch and disconnecting the battery negative terminal for 90 seconds minimum before manual installation. Follow a torque sequence of 17.5 Nm when affixing the ECU in place with three bolts. Any damage or drop of the Air Bag ECU assy makes it necessary to perform a replacement. The SRS wiring should be kept clear from contact with other components during installation while checking that all installation parts remain tight. The holder with connectors needs to be reconnected to the Air Bag ECU assy while ensuring the water-proof sheet is in its proper position. The process ends by following battery terminal reconnect procedures and initialization methods from the table then inspecting the SRS warning light.