How to replace the Crankshaft Position Sensor on 2004 Toyota Camry?

The right-hand side engine under cover demands removal through 5 screws and three clips before starting Crankshaft Position Sensor replacement. The right-hand side front fender apron seal requires removal when you detach its clip as well as 2 bolts. Start by disconnecting the sensor connector before unhinging the bolt and sensor itself. Follow the installation procedure by tightening the Crankshaft Position Sensor to 8.0 N.m (82 kgf.cm, 71 in.lbf). The final step is to install both the front fender apron seal on the right-hand side before putting back the engine under cover on the right-hand side.

OEM 2004 Toyota Camry Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Position Sensors found

View related parts
2004 Toyota Camry Sensor, Camshaft Position
Part Number: 90080-19014
$66.23 MSRP: $79.06
You Save: $12.83 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.0 x 2.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19014
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
2004 Toyota Camry Crankshaft Position Sensor
Part Number: 90080-19024
$131.47 MSRP: $186.11
You Save: $54.64 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 90919-05047
- Part Name Code: 11301K
- Item Weight: 1.40 Pounds
- Item Dimensions: 14.4 x 12.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19024
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS
View related parts
2004 Toyota Camry Crankshaft Position Sensor
Part Number: 90080-19009
$77.72 MSRP: $109.10
You Save: $31.38 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; RPM Sensor, Engine Management; Crankshaft Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05012
- Part Name Code: 15100R
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19009
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Camry Submodels:
- CE, LE, SE, XLE | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS

2004 Toyota Camry Crankshaft Position Sensor

Looking for affordable OEM 2004 Toyota Camry Crankshaft Position Sensor? Explore our comprehensive catalogue of genuine 2004 Toyota Camry Crankshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2004 Toyota Camry Parts Questions & Experts Answers

Q: How to replace the Crankshaft Position Sensor on 2004 Toyota Camry?
A: The right-hand side engine under cover demands removal through 5 screws and three clips before starting Crankshaft Position Sensor replacement. The right-hand side front fender apron seal requires removal when you detach its clip as well as 2 bolts. Start by disconnecting the sensor connector before unhinging the bolt and sensor itself. Follow the installation procedure by tightening the Crankshaft Position Sensor to 8.0 N.m (82 kgf.cm, 71 in.lbf). The final step is to install both the front fender apron seal on the right-hand side before putting back the engine under cover on the right-hand side.