How to replace the drive belt on 2003 Toyota Highlander?

Begin replacement of the drive belt by taking out the front wheel on the right side followed by the front fender splash shield located in the front right side and finally the front fender apron seal situated on the right-hand side. Start by removing the Engine Mounting Stay No.2 RH, the Engine Cover Sub-Assy No.1 and the Engine Moving Control Rod With Bracket by removing three bolts. Start by removing the engine mounting bracket No. 2 RH then uninstalling the fan and generator V belt through a process of slow clockwise drive belt tensioner turning alongside the utilization of Special Service Tool: 09249-63010 for drive bolt removal. The new fan and generator V belt installation requires users to turn the drive belt tensioner slowly clockwise before they can install the drive bolt through Special Service Tool: 09249-63010. Screw in the engine mounting bracket No. 2 RH at 52 Nm (531 kgf-cm, 38 ft. lbs.) before installing the engine moving control rod with bracket through its 3 bolts where each screw requires 64 Nm (653 kgf-cm, 47 ft. lbs.). Featuring a torque of 64 Nm (653 kgf-cm, 47 ft. lbs.), the engine mounting stay No. 2 RH needs installation following the engine mounting bracket No. 2 RH with the same torque.

OEM 2003 Toyota Highlander Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Drive Belts found

View related parts
2003 Toyota Highlander Serpentine Belt
Part Number: 90916-A2005
$37.39 MSRP: $52.04
You Save: $14.65 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, V-Ribbed; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, V(For Fan & Alternator)
- Manufacturer Note: (L)
- Replaces: 90916-02599
- Part Name Code: 16361A
- Item Weight: 0.50 Pounds
- Item Dimensions: 16.7 x 4.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-A2005
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Highlander Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2003 Toyota Highlander Belt, V (Cooler Compressor To Crankshaft Pulley)
Part Number: 99366-31040
$25.44 MSRP: $35.41
You Save: $9.97 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, V-Ribbed; Accessory Drive Belt; Serpentine Belt
- Replaces: 99366-21040-83, 99366-21040, 99366-D1040, 90080-91147
- Part Name Code: 88310A
- Item Weight: 0.70 Pounds
- Item Dimensions: 10.2 x 4.2 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 99366-31040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Highlander Submodels:
- Base, Limited, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
2003 Toyota Highlander Power Steering Belt
Part Number: 90080-91212
$15.16 MSRP: $21.10
You Save: $5.94 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, V-Ribbed; Accessory Drive Belt; Serpentine Belt Drive Kit; Serpentine Belt; V-Belt; Belt, V(For Vane Pump); Drive Belt
- Manufacturer Note: L=880
- Replaces: 90080-91088, 99364-90880, 90080-91088-83
- Part Name Code: 44310A
- Item Weight: 0.60 Pounds
- Item Dimensions: 16.0 x 4.3 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-91212
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Highlander Submodels:
- Base, Limited, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS

2003 Toyota Highlander Drive Belt

Looking for affordable OEM 2003 Toyota Highlander Drive Belt? Explore our comprehensive catalogue of genuine 2003 Toyota Highlander Drive Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Highlander Parts Questions & Experts Answers

Q: How to replace the drive belt on 2003 Toyota Highlander?
A: Begin replacement of the drive belt by taking out the front wheel on the right side followed by the front fender splash shield located in the front right side and finally the front fender apron seal situated on the right-hand side. Start by removing the Engine Mounting Stay No.2 RH, the Engine Cover Sub-Assy No.1 and the Engine Moving Control Rod With Bracket by removing three bolts. Start by removing the engine mounting bracket No. 2 RH then uninstalling the fan and generator V belt through a process of slow clockwise drive belt tensioner turning alongside the utilization of Special Service Tool: 09249-63010 for drive bolt removal. The new fan and generator V belt installation requires users to turn the drive belt tensioner slowly clockwise before they can install the drive bolt through Special Service Tool: 09249-63010. Screw in the engine mounting bracket No. 2 RH at 52 Nm (531 kgf-cm, 38 ft. lbs.) before installing the engine moving control rod with bracket through its 3 bolts where each screw requires 64 Nm (653 kgf-cm, 47 ft. lbs.). Featuring a torque of 64 Nm (653 kgf-cm, 47 ft. lbs.), the engine mounting stay No. 2 RH needs installation following the engine mounting bracket No. 2 RH with the same torque.