How to service and repair the Shock Absorber on 2002 Toyota Tundra?

Recruiting the suspension strut for service or repair begins by performing unit disassembly. The suspension support needs free coil spring clearance when Special Service Tool: 09727-30021 (09727-00010, 09727-00021, 09727-00031) compresses the coil spring. Do not let the tool get excessively compressed nor use an impact wrench on it because damage can occur. Start the strut service by first removing the suspension support center nut and progressing to remove the two retainers, cushion, suspension support and coil spring. Check the shock absorber function by extending and compressing its rod; abnormal resistance and strange sounds require shock absorber replacement. The shock absorber rod must be fully extended before drilling a hole into the cylinder that allows discharge of inside gas while preventing chips from flying away. Use a specific service tool to compress the coil spring once more before installing the coil spring onto the shock absorber while verifying that the lower end enters the spring seat gap. Install the cushion together with two retainers and the suspension support onto the piston rod before securing the new suspension support center nut for position and adjusting the support correctly. The special service tool should be removed before checking the suspension support direction and tightening the suspension center nut to 25 Nm (250 kgf-cm, 18 ft. lbs.).

OEM 2002 Toyota Tundra Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Shock Absorbers found

View related parts
2002 Toyota Tundra Shock Absorber, Rear
Part Number: 48531-09380
$101.42 MSRP: $142.37
You Save: $40.95 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock, Rear; Suspension Kit; Strut Assembly; Shock Set; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48531-AF031
- Position: Rear
- Replaces: 48531-09140, 48531-09141
- Item Weight: 5.10 Pounds
- Item Dimensions: 26.4 x 6.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48531-09380
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
2002 Toyota Tundra Shock Absorber
Part Number: 48510-09490
$139.81 MSRP: $197.93
You Save: $58.12 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Front Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48510-AF011
- Replaces: 48510-09310
- Item Weight: 5.80 Pounds
- Item Dimensions: 26.4 x 8.5 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09490
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
2002 Toyota Tundra Shock Absorber
Part Number: 48510-09750
$131.82 MSRP: $186.61
You Save: $54.79 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Complete Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48510-AF030
- Replaces: 48510-09350
- Item Weight: 5.60 Pounds
- Item Dimensions: 26.1 x 8.2 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09750
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tundra Submodels:
- Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
2002 Toyota Tundra Shock Absorber, Rear
Part Number: 48531-09121
$63.27 MSRP: $88.80
You Save: $25.53 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock, Rear; Suspension Kit; Strut Assembly; Shock Set; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48531-AF010
- Position: Rear
- Replaces: 48531-09120
- Item Weight: 4.60 Pounds
- Item Dimensions: 26.1 x 6.5 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48531-09121
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
2002 Toyota Tundra Shock Absorber, Rear
Part Number: 48531-09131
$62.79 MSRP: $88.14
You Save: $25.35 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock, Rear; Suspension Kit; Strut Assembly; Shock Set; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48531-AF020
- Position: Rear
- Replaces: 48531-09130
- Item Weight: 4.80 Pounds
- Item Dimensions: 26.4 x 6.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48531-09131
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
2002 Toyota Tundra Shock Absorber
Part Number: 48510-09760
$133.94 MSRP: $189.60
You Save: $55.66 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Front Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48510-AF060
- Replaces: 48510-A9130
- Item Weight: 9.90 Pounds
- Item Dimensions: 26.4 x 8.2 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09760
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
2002 Toyota Tundra Shock Absorber
Part Number: 48510-09500
$121.72 MSRP: $172.31
You Save: $50.59 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Front Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48510-AF021
- Replaces: 48510-09320
- Item Weight: 6.10 Pounds
- Item Dimensions: 27.1 x 8.3 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09500
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS

2002 Toyota Tundra Shock Absorber

Looking for affordable OEM 2002 Toyota Tundra Shock Absorber? Explore our comprehensive catalogue of genuine 2002 Toyota Tundra Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2002 Toyota Tundra Parts Questions & Experts Answers

Q: How to service and repair the Shock Absorber on 2002 Toyota Tundra?
A: Recruiting the suspension strut for service or repair begins by performing unit disassembly. The suspension support needs free coil spring clearance when Special Service Tool: 09727-30021 (09727-00010, 09727-00021, 09727-00031) compresses the coil spring. Do not let the tool get excessively compressed nor use an impact wrench on it because damage can occur. Start the strut service by first removing the suspension support center nut and progressing to remove the two retainers, cushion, suspension support and coil spring. Check the shock absorber function by extending and compressing its rod; abnormal resistance and strange sounds require shock absorber replacement. The shock absorber rod must be fully extended before drilling a hole into the cylinder that allows discharge of inside gas while preventing chips from flying away. Use a specific service tool to compress the coil spring once more before installing the coil spring onto the shock absorber while verifying that the lower end enters the spring seat gap. Install the cushion together with two retainers and the suspension support onto the piston rod before securing the new suspension support center nut for position and adjusting the support correctly. The special service tool should be removed before checking the suspension support direction and tightening the suspension center nut to 25 Nm (250 kgf-cm, 18 ft. lbs.).