How to service the rear shock absorber on 2001 Toyota Tundra?

Service of the rear shock absorber begins by using safety stands to support the body at a raised position that removes leaf spring tension from the axle housing. Detach the rear shock absorber by removing its bottom-side bolt and nut while stabilizing the piston rod and then removing the nut, retainer, cushion, and shock absorber respectively which is followed by removing both retainers and cushion. A new shock absorber needs replacement if compression tests of the rod reveal any irregular resistance or peculiar noises. When disposing of the shock absorber first extend its rod completely before drilling a hole in the cylinder to let out gas while avoiding any flying debris generated by drilling. A shock absorber bushing replacement requires Special Service Tools for 09632-36010 and a 19 mm deep socket wrench along with a press device for eliminating the old bushing. The new bushing installation requires Special Service Tools 09630-24014 (09620-24041) and 09632-36010 with a press device. First install the two retainers with a cushion onto the shock absorber and tighten the nut to 20 Nm (200 kgf-cm, 15 ft. lbs.) before adding the bolt and nut connection for the lower shock absorber side with 87 Nm (890 kgf-cm, 64 ft. lbs.) torque. The rear wheel needs installation with a torque of 110 Nm (1,150 kgf-cm, 83 ft. lbs.) before removing the safety stands.

OEM 2001 Toyota Tundra Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Shock Absorbers found

View related parts
2001 Toyota Tundra Shock Absorber
Part Number: 48510-09750
$131.82 MSRP: $186.61
You Save: $54.79 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Complete Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48510-AF030
- Replaces: 48510-09350
- Item Weight: 5.60 Pounds
- Item Dimensions: 26.1 x 8.2 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09750
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tundra Submodels:
- Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
2001 Toyota Tundra Shock Absorber, Rear
Part Number: 48531-09380
$101.42 MSRP: $142.37
You Save: $40.95 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock, Rear; Suspension Kit; Strut Assembly; Shock Set; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48531-AF031
- Position: Rear
- Replaces: 48531-09140, 48531-09141
- Item Weight: 5.10 Pounds
- Item Dimensions: 26.4 x 6.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48531-09380
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
2001 Toyota Tundra Shock Absorber
Part Number: 48510-09490
$139.81 MSRP: $197.93
You Save: $58.12 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Front Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48510-AF011
- Replaces: 48510-09310
- Item Weight: 5.80 Pounds
- Item Dimensions: 26.4 x 8.5 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09490
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
2001 Toyota Tundra Shock Absorber
Part Number: 48510-09760
$133.94 MSRP: $189.60
You Save: $55.66 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Front Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48510-AF060
- Replaces: 48510-A9130
- Item Weight: 9.90 Pounds
- Item Dimensions: 26.4 x 8.2 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09760
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
2001 Toyota Tundra Shock Absorber, Rear
Part Number: 48531-09121
$63.27 MSRP: $88.80
You Save: $25.53 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock, Rear; Suspension Kit; Strut Assembly; Shock Set; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48531-AF010
- Position: Rear
- Replaces: 48531-09120
- Item Weight: 4.60 Pounds
- Item Dimensions: 26.1 x 6.5 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48531-09121
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
2001 Toyota Tundra Shock Absorber, Rear
Part Number: 48531-09131
$62.79 MSRP: $88.14
You Save: $25.35 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock, Rear; Suspension Kit; Strut Assembly; Shock Set; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48531-AF020
- Position: Rear
- Replaces: 48531-09130
- Item Weight: 4.80 Pounds
- Item Dimensions: 26.4 x 6.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48531-09131
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS
View related parts
2001 Toyota Tundra Shock Absorber
Part Number: 48510-09500
$121.72 MSRP: $172.31
You Save: $50.59 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Front Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Manufacturer Note: MARK 48510-AF021
- Replaces: 48510-09320
- Item Weight: 6.10 Pounds
- Item Dimensions: 27.1 x 8.3 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09500
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 8 Cyl 4.7 L GAS

2001 Toyota Tundra Shock Absorber

Looking for affordable OEM 2001 Toyota Tundra Shock Absorber? Explore our comprehensive catalogue of genuine 2001 Toyota Tundra Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota Tundra Parts Questions & Experts Answers

Q: How to service the rear shock absorber on 2001 Toyota Tundra?
A: Service of the rear shock absorber begins by using safety stands to support the body at a raised position that removes leaf spring tension from the axle housing. Detach the rear shock absorber by removing its bottom-side bolt and nut while stabilizing the piston rod and then removing the nut, retainer, cushion, and shock absorber respectively which is followed by removing both retainers and cushion. A new shock absorber needs replacement if compression tests of the rod reveal any irregular resistance or peculiar noises. When disposing of the shock absorber first extend its rod completely before drilling a hole in the cylinder to let out gas while avoiding any flying debris generated by drilling. A shock absorber bushing replacement requires Special Service Tools for 09632-36010 and a 19 mm deep socket wrench along with a press device for eliminating the old bushing. The new bushing installation requires Special Service Tools 09630-24014 (09620-24041) and 09632-36010 with a press device. First install the two retainers with a cushion onto the shock absorber and tighten the nut to 20 Nm (200 kgf-cm, 15 ft. lbs.) before adding the bolt and nut connection for the lower shock absorber side with 87 Nm (890 kgf-cm, 64 ft. lbs.) torque. The rear wheel needs installation with a torque of 110 Nm (1,150 kgf-cm, 83 ft. lbs.) before removing the safety stands.