How to service the rear Sway Bar Kit on 2001 Toyota Camry?

Service of the rear sway bar kit starts with removing the rear wheels followed by a proper torque of 103 Nm (1,050 kgf-cm, 76 ft. lbs.) when reassembling the wheels. First detach the left and right sway bar links by taking out 4 nuts and 2 links while securing the stud with a 5 mm hexagon wrench to prevent ball joint movements and tighten all joints to 39 Nm (400 kgf-cm, 29 ft. lbs.). Three bolts and a clip need removal to take out the heat insulator. Use a torque wrench to tighten all 4 bolts along with 2 brackets and bushings at 19 Nm (195 kgf-cm, 14 ft. lbs.) yet keep the bushing in the right position on the sway bar kit during reassembly. Finally, remove the sway bar kit. To examine the sway bar link ball joint twisting movement inspect the ball joint stud after opening it to 5 forward and reverse rotations before installing the nut while using a torque wrench to twist the nut once every 2 to 4 seconds to measure 0.05 to 1.0 Nm tightening force (0.5 to 10 kgf-cm, 0.4 to 8.7 inch lbs). Post-installation procedures execute every step in reverse order when compared to the removal sequence.

OEM 2001 Toyota Camry Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Sway Bar Kits found

View related parts
2001 Toyota Camry Stabilizer Bar, Rear
Part Number: 48812-AA030
$106.34 MSRP: $149.26
You Save: $42.92 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 48812-33090
- Part Name Code: 48812
- Item Weight: 5.10 Pounds
- Item Dimensions: 44.1 x 9.9 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AA030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2001 Toyota Camry Stabilizer Bar, Rear
Part Number: 48812-AC040
$97.63 MSRP: $137.05
You Save: $39.42 (29%)
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Part Name Code: 48812
- Item Weight: 5.00 Pounds
- Item Dimensions: 42.4 x 9.1 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AC040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- LE, XLE | 6 Cyl 3.0 L GAS
View related parts
2001 Toyota Camry Stabilizer Bar, Rear
Part Number: 48812-AA010
$93.84 MSRP: $131.72
You Save: $37.88 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 48812-AC030, 48812-33100
- Part Name Code: 48812
- Item Weight: 5.40 Pounds
- Item Dimensions: 41.5 x 9.6 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AA010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Toyota Camry Stabilizer Bar, Front
Part Number: 48811-AA011
$90.88 MSRP: $127.56
You Save: $36.68 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: 48811-AA010
- Part Name Code: 48811
- Item Weight: 8.20 Pounds
- Item Dimensions: 42.5 x 11.9 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AA011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS
View related parts
2001 Toyota Camry Stabilizer Bar, Front
Part Number: 48811-33060
$83.65 MSRP: $117.41
You Save: $33.76 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Part Name Code: 48811
- Item Weight: 4.50 Pounds
- Item Dimensions: 45.0 x 12.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-33060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS
View related parts
2001 Toyota Camry Bar, Stabilizer, Front
Part Number: 48811-33080
$76.07 MSRP: $106.77
You Save: $30.70 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sway Bar
- Manufacturer Note: (J)
- Position: Front
- Replaces: 48811-07010, 48811-AA070, 48811-AC020, 48811-06070
- Part Name Code: 48811
- Item Weight: 7.80 Pounds
- Item Dimensions: 46.3 x 10.3 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-33080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

2001 Toyota Camry Sway Bar Kit

Looking for affordable OEM 2001 Toyota Camry Sway Bar Kit? Explore our comprehensive catalogue of genuine 2001 Toyota Camry Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota Camry Parts Questions & Experts Answers

Q: How to service the rear Sway Bar Kit on 2001 Toyota Camry?
A: Service of the rear sway bar kit starts with removing the rear wheels followed by a proper torque of 103 Nm (1,050 kgf-cm, 76 ft. lbs.) when reassembling the wheels. First detach the left and right sway bar links by taking out 4 nuts and 2 links while securing the stud with a 5 mm hexagon wrench to prevent ball joint movements and tighten all joints to 39 Nm (400 kgf-cm, 29 ft. lbs.). Three bolts and a clip need removal to take out the heat insulator. Use a torque wrench to tighten all 4 bolts along with 2 brackets and bushings at 19 Nm (195 kgf-cm, 14 ft. lbs.) yet keep the bushing in the right position on the sway bar kit during reassembly. Finally, remove the sway bar kit. To examine the sway bar link ball joint twisting movement inspect the ball joint stud after opening it to 5 forward and reverse rotations before installing the nut while using a torque wrench to twist the nut once every 2 to 4 seconds to measure 0.05 to 1.0 Nm tightening force (0.5 to 10 kgf-cm, 0.4 to 8.7 inch lbs). Post-installation procedures execute every step in reverse order when compared to the removal sequence.