Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2001 Toyota Camry Ball Joint

Control Arm Joint
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ball Joints found

  • 2001 Toyota Camry Ball Joint - 43330-39435
    2001 Toyota Camry Ball Joint Diagram - 43330-39435
    View related parts

    2001 Toyota Camry Ball Joint, Lower

    Part Number: 43330-39435
    $68.84 MSRP: $96.62
    You Save: $27.78 (29%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Joint Assembly, Lower Ball; Suspension Ball Joint, Front; Joint Assembly, Lower Ball, Front Passenger Side; Joint Assembly, Lower Ball, Front Driver Side; Suspension Ball Joint
    • Position: Lower
    • Replaces: 43330-09050, 43330-39285
    • Item Weight: 2.00 Pounds
    • Item Dimensions: 5.7 x 3.3 x 2.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 43330-39435
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2001 Toyota Camry Submodels:
    • CE, DLX, DX, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
  • 2001 Toyota Camry Ball Joint - 43330-09051
    2001 Toyota Camry Ball Joint Diagram - 43330-09051
    View related parts

    2001 Toyota Camry Ball Joint, Lower

    Part Number: 43330-09051
    $68.01 MSRP: $95.46
    You Save: $27.45 (29%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Joint Assembly, Lower Ball; Suspension Ball Joint, Front; Lower Ball Joint; Front Passenger & Driver Side Assembly; Suspension Ball Joint
    • Position: Lower
    • Item Weight: 2.20 Pounds
    • Item Dimensions: 5.5 x 3.3 x 2.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 43330-09051
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2001 Toyota Camry Submodels:
    • CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

2001 Toyota Camry Ball Joint

Looking for affordable OEM 2001 Toyota Camry Ball Joint? Explore our comprehensive catalogue of genuine 2001 Toyota Camry Ball Joint. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota Camry Parts Questions & Experts Answers

  • Q: How to service and repair the ball joint on 2001 Toyota Camry?
    A: Start by disconnecting the steering knuckle with the axle hub and move on to the lower ball joint service and repair work. Begin by unscrewing the dust deflector with a screwdriver and then removing the cotter pin and nut. To take off the lower ball joint use Special Service Tool: 09628-62011 as directed. To inspect ball joint rotation you should move the ball joint five times before installing the nut followed by continuous nut tightening with a torque wrench at 2 to 4 second intervals taking the fifth reading in a range of 1.0 to 3.4 Nm (10 to 35 kgf-cm, 8.7 to 30 inch lbs). First secure the lower ball joint by tightening the nut to 123 Nm (1,250 kgf-cm) torque. Afterward replace the cotter pin with a new one. Appy new dust deflector while aligning sensor openings between the steering knuckle and ABS speed sensor parts with Special Service Tools: 09316-60011, 09316-00011, 09316-00041, and 09608-32010 plus a hammer. Install the steering knuckle back into place and measure the ABS sensor output plus front wheel alignment.

Related 2001 Toyota Camry Parts

Alternate Year Models

+
2000 Toyota Camry Ball Joint 2002 Toyota Camry Ball Joint