How to Service and Repair a Shock Absorber on 2001 Toyota Camry?

The repair and service procedure of the suspension strut starts by removing the front wheel while tightening it to 103 Nm (1,050 kgf-cm, 76 ft. lbs.). First remove the rotating clamp bolt that fastens the shock absorber clamp including the flexible hose and ABS speed sensor wire harness from the strut by using a torque of 29 Nm (300 kgf-cm, 22 ft. lbs.). To remove the shock absorber from the steering knuckle start by disconnecting the stabilizer bar link from the shock absorber then proceed to remove the shock absorber and bolts from the two lower steering knuckle nuts and bolts using a torque of 211 Nm (2,150 kgf-cm, 156 ft. lbs.) before taking the shock absorber off. Apply engine oil to threads of the nuts before installing them. Remove the shock absorber with the coil spring by using a 80 Nm (820 kgf-cm, 59 ft. lbs.) torque to uninstall the three nuts, suspension support No.2, and shock absorber with the coil spring. The installation process requires rotating the suspension support before fitting it according to the provided direction. You should check the front wheel alignment as a final step after installation.

OEM 2001 Toyota Camry Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Shock Absorbers found

View related parts
2001 Toyota Camry Strut
Part Number: 48520-33011
$124.56 MSRP: $176.99
You Save: $52.43 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Shock Absorber
- Replaces: 48520-33050, 48520-06120, 48520-33010
- Item Weight: 9.50 Pounds
- Item Dimensions: 27.7 x 8.9 x 7.8 inches
- Condition: New
- SKU: 48520-33011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Toyota Camry Absorber Set, Rear Left-Hand
Part Number: 48540-39565
$159.20 MSRP: $225.37
You Save: $66.17 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: ABSORBER SET, RR LH; Shock Absorber
- Position: Rear Driver Side
- Replaces: 48540-39345, 48540-A9080, 48540-A9050, 48540-39235, 48540-A9090, 48540-39236, 48540-A9021, 48540-39266, 48540-A9010
- Item Weight: 11.80 Pounds
- Item Dimensions: 26.6 x 6.9 x 6.0 inches
- Condition: New
- SKU: 48540-39565
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Toyota Camry Strut, Rear Passenger Side
Part Number: 48530-80142
$160.73 MSRP: $227.53
You Save: $66.80 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Rear Right-Hand; Suspension Strut, Rear Right; Shock Absorber
- Position: Rear Passenger Side
- Replaces: 48530-A9010, 48530-A9020, 48530-39386, 48530-A9090, 48530-39355, 48530-80145, 48530-39565, 48530-A9050, 48530-A9021, 48530-A9080, 48530-39356
- Item Weight: 12.80 Pounds
- Item Dimensions: 27.1 x 6.8 x 5.9 inches
- Condition: New
- SKU: 48530-80142
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Toyota Camry Absorber Set, Front Right-Hand
Part Number: 48510-80137
$140.05 MSRP: $198.25
You Save: $58.20 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: ABSORBER SET, FR RH; Shock Absorber
- Position: Front Passenger Side
- Replaces: 48510-A9120, 48510-39496, 48510-A9020, 48510-39476, 48510-39805, 48510-39485, 48510-39486, 48510-39815, 48510-80140, 48510-A9090, 48510-39475, 48510-A9010
- Item Weight: 10.70 Pounds
- Item Dimensions: 26.9 x 8.4 x 7.7 inches
- Condition: New
- SKU: 48510-80137
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Toyota Camry Absorber Set, Front Left-Hand
Part Number: 48520-39605
$125.13 MSRP: $177.13
You Save: $52.00 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: ABSORBER SET, FR LH; Shock Absorber
- Position: Front Driver Side
- Replaces: 48520-39635, 48520-A9010, 48520-39166, 48520-39355, 48520-39156, 48520-39365, 48520-A9100, 48520-39176, 48520-A9070, 48520-A9020
- Item Weight: 11.00 Pounds
- Item Dimensions: 28.2 x 8.6 x 7.7 inches
- Condition: New
- SKU: 48520-39605
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, DLX, DX, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

2001 Toyota Camry Shock Absorber

Looking for affordable OEM 2001 Toyota Camry Shock Absorber? Explore our comprehensive catalogue of genuine 2001 Toyota Camry Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota Camry Shock Absorber Parts Q&A

Q: How to Service and Repair a Shock Absorber on 2001 Toyota Camry?
A: The repair and service procedure of the suspension strut starts by removing the front wheel while tightening it to 103 Nm (1,050 kgf-cm, 76 ft. lbs.). First remove the rotating clamp bolt that fastens the shock absorber clamp including the flexible hose and ABS speed sensor wire harness from the strut by using a torque of 29 Nm (300 kgf-cm, 22 ft. lbs.). To remove the shock absorber from the steering knuckle start by disconnecting the stabilizer bar link from the shock absorber then proceed to remove the shock absorber and bolts from the two lower steering knuckle nuts and bolts using a torque of 211 Nm (2,150 kgf-cm, 156 ft. lbs.) before taking the shock absorber off. Apply engine oil to threads of the nuts before installing them. Remove the shock absorber with the coil spring by using a 80 Nm (820 kgf-cm, 59 ft. lbs.) torque to uninstall the three nuts, suspension support No.2, and shock absorber with the coil spring. The installation process requires rotating the suspension support before fitting it according to the provided direction. You should check the front wheel alignment as a final step after installation.