How to replace the rear Sway Bar Kit on 2002 Toyota Camry?

The replacement process for the rear sway bar kit starts with taking off the rear wheel. The removal process starts with moving the rear sway bar link assembly left-hand side by unfastening its 2 nuts and sway bar link while using a hexagon wrench (5 mm) to hold steady the stud when the ball joint rotates. The same process needs to be done for the right-hand side sway bar link assembly. The left-hand side sway bar link assembly ball joint requires testing by rotating the stud 5 times before adding the nut. Afterward, use a torque wrench to repeatedly tighten the nut at a speed of 2-4 seconds per turn and measure torque on the 5th turn aiming for 0.05 - 1.0 Nm (0.5 - 10 kgf-cm, 0.4 - 8.7 inch lbs.). Start sway bar removal by unfastening the 8 bolts and both No. 1 brackets and two bushings. Install the bushing and bracket on the left-hand side using four bolts while tightening to 19 Nm (195 kgf-cm, 14 ft. lbs.) and check the use of appropriate bolts A and B before placing the bushing against the inner side of the bushing stopper on the sway bar. Put the left-hand side rear sway bar link assembly into place by detaching its 2 nuts and sway bar link at 39 Nm (400 kgf-cm, 29 ft. lbs.); alternately use a 5 mm hexagon wrench to lock the stud if it rotates with the nut. The assembly process for the right-hand side rear sway bar link should proceed according to the left-hand side instructions. Reinstall the rear wheel with a proper torque of 103 Nm (1,050 kgf-cm, 76 ft. lbs.).

OEM 2002 Toyota Camry Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Sway Bar Kits found

View related parts
2002 Toyota Camry Stabilizer Bar, Rear
Part Number: 48812-AA030
$106.34 MSRP: $149.26
You Save: $42.92 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 48812-33090
- Part Name Code: 48812
- Item Weight: 5.10 Pounds
- Item Dimensions: 44.1 x 9.9 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AA030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2002 Toyota Camry Stabilizer Bar, Rear
Part Number: 48812-AA010
$93.84 MSRP: $131.72
You Save: $37.88 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 48812-AC030, 48812-33100
- Part Name Code: 48812
- Item Weight: 5.40 Pounds
- Item Dimensions: 41.5 x 9.6 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AA010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2002 Toyota Camry Bar, Stabilizer, Front
Part Number: 48811-33080
$76.07 MSRP: $106.77
You Save: $30.70 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sway Bar
- Manufacturer Note: (J)
- Position: Front
- Replaces: 48811-07010, 48811-AA070, 48811-AC020, 48811-06070
- Part Name Code: 48811
- Item Weight: 7.80 Pounds
- Item Dimensions: 46.3 x 10.3 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-33080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2002 Toyota Camry Stabilizer Bar, Front
Part Number: 48811-AA060
$130.77 MSRP: $185.11
You Save: $54.34 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.80 Pounds
- Item Dimensions: 44.2 x 12.1 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AA060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
2002 Toyota Camry Stabilizer Bar, Front
Part Number: 48811-AA020
$124.30 MSRP: $175.96
You Save: $51.66 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: OD=23
- Position: Front
- Replaces: 48811-33130
- Part Name Code: 48811
- Item Weight: 7.50 Pounds
- Item Dimensions: 45.0 x 12.6 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AA020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2002 Toyota Camry Stabilizer Bar, Front
Part Number: 48811-33140
$124.42 MSRP: $176.14
You Save: $51.72 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.50 Pounds
- Item Dimensions: 45.5 x 12.7 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-33140
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
2002 Toyota Camry Stabilizer Bar, Rear
Part Number: 48812-AA090
$97.63 MSRP: $137.05
You Save: $39.42 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Manufacturer Note: MEXICO SPEC
- Position: Rear
- Replaces: 48812-33180
- Part Name Code: 48812
- Item Weight: 5.20 Pounds
- Item Dimensions: 42.4 x 9.4 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AA090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Camry Submodels:
- LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
2002 Toyota Camry Stabilizer Bar, Rear
Part Number: 48812-AA050
$93.96 MSRP: $131.89
You Save: $37.93 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 48812-33170
- Part Name Code: 48812
- Item Weight: 5.00 Pounds
- Item Dimensions: 54.1 x 9.6 x 9.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AA050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2002 Toyota Camry Submodels:
- Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

2002 Toyota Camry Sway Bar Kit

Looking for affordable OEM 2002 Toyota Camry Sway Bar Kit? Explore our comprehensive catalogue of genuine 2002 Toyota Camry Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2002 Toyota Camry Parts Questions & Experts Answers

Q: How to replace the rear Sway Bar Kit on 2002 Toyota Camry?
A: The replacement process for the rear sway bar kit starts with taking off the rear wheel. The removal process starts with moving the rear sway bar link assembly left-hand side by unfastening its 2 nuts and sway bar link while using a hexagon wrench (5 mm) to hold steady the stud when the ball joint rotates. The same process needs to be done for the right-hand side sway bar link assembly. The left-hand side sway bar link assembly ball joint requires testing by rotating the stud 5 times before adding the nut. Afterward, use a torque wrench to repeatedly tighten the nut at a speed of 2-4 seconds per turn and measure torque on the 5th turn aiming for 0.05 - 1.0 Nm (0.5 - 10 kgf-cm, 0.4 - 8.7 inch lbs.). Start sway bar removal by unfastening the 8 bolts and both No. 1 brackets and two bushings. Install the bushing and bracket on the left-hand side using four bolts while tightening to 19 Nm (195 kgf-cm, 14 ft. lbs.) and check the use of appropriate bolts A and B before placing the bushing against the inner side of the bushing stopper on the sway bar. Put the left-hand side rear sway bar link assembly into place by detaching its 2 nuts and sway bar link at 39 Nm (400 kgf-cm, 29 ft. lbs.); alternately use a 5 mm hexagon wrench to lock the stud if it rotates with the nut. The assembly process for the right-hand side rear sway bar link should proceed according to the left-hand side instructions. Reinstall the rear wheel with a proper torque of 103 Nm (1,050 kgf-cm, 76 ft. lbs.).

Related 2002 Toyota Camry Parts

Alternate Year Models

2001 Toyota Camry Sway Bar Kit 2003 Toyota Camry Sway Bar Kit