How to service and repair the A/C Clutch on 2000 Toyota Tacoma?

A repair or service of the compressor clutch begins with its full disassembly process. Service Tool 07112-66040 along with a socket wrench will be needed to take off the shaft bolt which requires 13.2 Nm (135 kg.cm, 9 ft.lb) of torque. After placing Special Service Tool onto the pressure plate you should use a socket wrench to extract it while removing the shims in the pressure plate. Pouring Special Service Tool: 07114-84020 onto the snap ring permits removal until you reach the assembly stage when you need to position the beveled side of the snap ring facing upward. From the shaft remove the rotor using plastic clamping to preserve the pulley. The process of removing the stator begins with disconnecting the stator lead wire and afterwards performing a snap ring removal (oriented for the same beveled side position) using Special Service Tool: 07114-84020 followed by extraction of the stator. A dial indicator allows the clearance check of the magnetic clutch during reassembly by measuring the pressure plate to rotor distance with the positive battery terminal connected to the magnetic clutch lead wire. The necessary measurement for standard clearance is between 0.5 mm to 0.65 mm (0.020 to 0.025 in.) but when this range is not achieved use shims which measure 0.1 mm (0.004 in.), 0.3 mm (0.012 in.), or 0.5 mm (0.020 in.) to reach the specified standard.

OEM 2000 Toyota Tacoma A/C Clutch

Air Conditioning Clutch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 A/C Clutches found

View related parts
2000 Toyota Tacoma Clutch Assembly
Part Number: 88410-34040
$144.98 MSRP: $205.24
You Save: $60.26 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Assembly, Magnet; A/C Compressor Clutch; Clutch
- Replaces: 88410-30440
- Part Name Code: 88410
- Item Weight: 16.60 Pounds
- Item Dimensions: 11.6 x 7.2 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88410-34040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
2000 Toyota Tacoma Clutch Assembly
Part Number: 88410-35340
$148.27 MSRP: $209.90
You Save: $61.63 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Assembly, Magnet; A/C Compressor Clutch; Clutch
- Manufacturer Note: DEALER OPTION
- Replaces: 88410-04030
- Part Name Code: 88410
- Item Weight: 4.70 Pounds
- Item Dimensions: 8.0 x 6.9 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88410-35340
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Clutch Coil
Part Number: 88411-02030
$138.83 MSRP: $196.53
You Save: $57.70 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stator, Magnet Clutch; A/C Compressor Clutch Coil; Magnet; Coil; Stator Sub-Assembly, Magnet Clutch; A/C Compressor Clutch
- Replaces: 88411-2A030, 88411-22310, 88411-0C010, 88411-04010
- Part Name Code: 88302
- Item Weight: 2.00 Pounds
- Item Dimensions: 6.3 x 5.5 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88411-02030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Clutch
Part Number: 88410-34020
$145.10 MSRP: $205.41
You Save: $60.31 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Assembly, Magnet; A/C Compressor Clutch
- Replaces: 88410-04020
- Part Name Code: 88410
- Item Weight: 5.50 Pounds
- Item Dimensions: 6.3 x 6.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88410-34020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
2000 Toyota Tacoma Rotor
Part Number: 88412-35090
$342.26 MSRP: $501.58
You Save: $159.32 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Magnet Clutch; A/C Compressor Clutch Pulley; Rotor Sub-Assembly, Magnet Clutch; A/C Compressor Clutch
- Part Name Code: 88301
- Item Weight: 2.70 Pounds
- Item Dimensions: 5.7 x 5.4 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88412-35090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 6 Cyl 3.4 L GAS
View related parts
2000 Toyota Tacoma Rotor
Part Number: 88412-95J00
$285.01 MSRP: $406.92
You Save: $121.91 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Magnet Clutch; A/C Compressor Clutch Pulley; Rotor Sub-Assembly, Magnet Clutch; A/C Compressor Clutch
- Part Name Code: 88301
- Item Weight: 2.20 Pounds
- Item Dimensions: 5.9 x 5.4 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88412-95J00
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
2000 Toyota Tacoma Hub Sub-Assembly, Magnet Clutch
Part Number: 88403-06050
Product Specifications
- Other Name: Hub Sub-Assembly, Magnet; A/C Compressor Clutch
- Replaces: 88403-30290
- Part Name Code: 88403
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88403-06050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS

2000 Toyota Tacoma A/C Clutch

Looking for affordable OEM 2000 Toyota Tacoma A/C Clutch? Explore our comprehensive catalogue of genuine 2000 Toyota Tacoma A/C Clutch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2000 Toyota Tacoma A/C Clutch Parts Q&A

Q: How to service and repair the A/C Clutch on 2000 Toyota Tacoma?
A: A repair or service of the compressor clutch begins with its full disassembly process. Service Tool 07112-66040 along with a socket wrench will be needed to take off the shaft bolt which requires 13.2 Nm (135 kg.cm, 9 ft.lb) of torque. After placing Special Service Tool onto the pressure plate you should use a socket wrench to extract it while removing the shims in the pressure plate. Pouring Special Service Tool: 07114-84020 onto the snap ring permits removal until you reach the assembly stage when you need to position the beveled side of the snap ring facing upward. From the shaft remove the rotor using plastic clamping to preserve the pulley. The process of removing the stator begins with disconnecting the stator lead wire and afterwards performing a snap ring removal (oriented for the same beveled side position) using Special Service Tool: 07114-84020 followed by extraction of the stator. A dial indicator allows the clearance check of the magnetic clutch during reassembly by measuring the pressure plate to rotor distance with the positive battery terminal connected to the magnetic clutch lead wire. The necessary measurement for standard clearance is between 0.5 mm to 0.65 mm (0.020 to 0.025 in.) but when this range is not achieved use shims which measure 0.1 mm (0.004 in.), 0.3 mm (0.012 in.), or 0.5 mm (0.020 in.) to reach the specified standard.