Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 88403-06050
Hub Sub-Assembly, Magnet Clutch

1993-2007 Toyota 8840306050

Customer Questions & Expert Answers (23)
Toyota 88403-06050 Hub Sub-Assembly, Magnet Clutch
  • Part Description
    Hub Sub-Assembly, Magnet; A/C Compressor Clutch
  • Part Name Code
    88403
  • Replaces
    88403-30290
  • Manufacturer
    Toyota
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 88403-06050 Hub Sub-Assembly, Magnet Clutch is Ref No. 15 in the diagram below

    1999 Toyota RAV4 Hub Sub-Assembly, Magnet Clutch Diagram for 88403-06050
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 88403-06050

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code88403
    Manufacturer Part Number88403-06050
    Part DescriptionHub Sub-Assembly, Magnet; A/C Compressor Clutch
    Item Weight1.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces88403-30290
    ManufacturerToyota
    SKU88403-06050
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2000 Toyota 4RunnerBase, Limited, SR54 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
    1995-1999 Toyota AvalonXL, XLS6 Cyl 3.0 L GAS
    1994-2001 Toyota CamryCE, DX, LE, SE, XLE4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
    1994-1999 Toyota CelicaGT, ST4 Cyl 1.8 L GAS, 4 Cyl 2.2 L GAS
    1995-2007 Toyota Land CruiserBase6 Cyl 4.5 L GAS, 8 Cyl 4.7 L GAS
    1994-1997 Toyota PreviaDX, LE4 Cyl 2.4 L GAS
    1998-2000 Toyota RAV4Base4 Cyl 2.0 L GAS
    1999-2003 Toyota SolaraSE, SLE4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
    1993-1998 Toyota SupraBase, Twin Turbo6 Cyl 3.0 L GAS
    1995-2004 Toyota TacomaBase, DLX, Limited, Pre Runner, SR5, S-Runner4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
    View More

  • Customer Questions & Expert Answers

    Q:
    Can you provide the right 88403-06050 for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 88403-06050 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What steps are involved for the engine 2001 Toyota Camry to disconnect hoses? Posted by Customer
    A:
    Disconnect both discharge and suction hoses by removing the two bolts and cap the fittings.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    What should you ensure about the snap ring during reassembly for the 2001 Toyota Camry? Posted by Customer
    A:
    The beveled side of the snap ring should face up.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    What is the procedure for removing the compressor for the 2000 Toyota Camry? Posted by Customer
    A:
    Disconnect the connector, remove the 2 bolts, nut, and drive belt adjusting bar bracket, followed by the 3 bolts.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    How do you check the magnetic clutch clearance after reassembly for the 2000 Toyota 4Runner? Posted by Customer
    A:
    Set the dial indicator to the pressure plate, connect the magnetic clutch lead wire to the positive (+) terminal of the battery, and check the clearance between the pressure plate and rotor when connecting the negative (-) terminal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    What should you do if the clearance is not within the standard range for the 2000 Toyota Camry? Posted by Customer
    A:
    Adjust it using shims of thickness 0.1 mm (0.004 in.), 0.3 mm (0.012 in.), or 0.5 mm (0.020 in.) to achieve the standard clearance.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    What is the installation process for the cooler compressor assembly for the 2007 Toyota Land Cruiser? Posted by Customer
    A:
    Install the cooler compressor assembly with the 3 bolts, torqued to 49 N.m (500 kgf.cm, 36 ft.lbf), and reconnect the connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    What is the order of reassembly for the 2000 Toyota Land Cruiser? Posted by Customer
    A:
    Reassembly follows the reverse order of disassembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    What should be done before charging the refrigeration system for the 2003 Toyota Land Cruiser? Posted by Customer
    A:
    Evacuate air from the refrigeration system before charging it with refrigerant.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    What are the final steps after connecting the hoses for the 2000 Toyota Land Cruiser? Posted by Customer
    A:
    Install and check the drive belt, reconnect the negative (-) terminal cable to the battery, evacuate air from the refrigeration system, and charge it with 650 ± 50g (22.93 ± 1.76 oz.) of refrigerant.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    What is required for the installation of the compressor for the 2000 Toyota Solara? Posted by Customer
    A:
    Install the compressor with 3 bolts, torqued to 25 Nm (250 kg.cm, 18 ft.lb), followed by connecting the connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    How do you check the magnetic clutch clearance after reassembly for the 2000 Toyota RAV4? Posted by Customer
    A:
    Set the dial indicator to the pressure plate, connect the magnetic clutch lead wire to the positive (+) terminal of the battery, and check the clearance between the pressure plate and rotor while connecting the negative (-) terminal of the battery.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    How do you remove the rotor for the 2004 Toyota Land Cruiser? Posted by Customer
    A:
    Use Special Service Tool: 95994-10020 to take off the snap ring, ensuring that during reassembly, the beveled side of the snap ring faces up. Carefully tap the rotor off the shaft with a plastic hammer.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    What should be done after disconnecting the battery for the 2000 Toyota Tacoma? Posted by Customer
    A:
    Discharge the refrigerant from the refrigeration system, remove the engine under cover, and disconnect the discharge and suction hoses by removing the 2 bolts; cap the open fittings immediately to prevent moisture or dirt from entering the system.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    What is the installation procedure for the 5VZ-FE engine for the 2004 Toyota Tundra? Posted by Customer
    A:
    Install the compressor with the 4 bolts, torquing to 25 N.m (250 kgf.cm, 18 in.lbf), and connect the connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    What tool is used to remove the pressure plate after the shaft bolt is taken out for the 2003 Toyota Tacoma? Posted by Customer
    A:
    Install Special Service Tool: 07112-76060 on the pressure plate and remove it with the socket wrench.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    What is the first step to service and repair the compressor and magnetic clutch for the 2001 Toyota Tacoma? Posted by Customer
    A:
    Begin by running the engine at idle speed with the A/C on for approximately 10 minutes, then stop the engine and disconnect the negative (-) terminal cable from the battery.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    What is the standard clearance for the magnetic clutch for the 2000 Toyota Tacoma? Posted by Customer
    A:
    The standard clearance should be 0.5 ± 0.15 mm (0.020 ± 0.0059 in.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    What is the next step after installing the stator for the 2000 Toyota Solara? Posted by Customer
    A:
    Install the rotor on the stator and secure it with a new snap ring using the same tool, ensuring the beveled side faces up.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    What is the first step to service and repair the compressor clutch for the 2003 Toyota Tundra? Posted by Customer
    A:
    Run the engine at idle speed with the A/C on for approximately 10 minutes, then stop the engine and disconnect the negative (-) terminal cable from the battery.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    What is the standard clearance for the magnetic clutch for the 2003 Toyota Tundra? Posted by Customer
    A:
    Aim for a standard clearance of 0.5 ± 0.15 mm (0.020 ± 0.0059 in.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    How do you disconnect the discharge and suction hoses for the 2UZ-FE engine for the 2000 Toyota Tundra? Posted by Customer
    A:
    Remove the 2 nuts and cap the open fittings.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    Q:
    What is the next step after installing the compressor and hoses for the 2002 Toyota Tacoma? Posted by Customer
    A:
    Install and check the drive belt, then reinstall the engine under cover.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar A/C Clutch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 88403-06050, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 88403-06050 Hub Sub-Assembly, Magnet Clutch. It is sometimes referred to as Toyota A/C Clutch. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 8840306050 Hub Sub-Assembly, Magnet Clutch. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery