×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2000 Toyota Tacoma A/C Accumulator
Accumulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 A/C Accumulator found
2000 Toyota Tacoma Tank, Receiver Air Conditioner
Part Number: 88471-34010$34.40 MSRP: $47.89You Save: $13.49 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Tank, Receiver; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator
- Manufacturer Note: DEALER OPT
- Part Name Code: 88471
- Item Weight: 1.40 Pounds
- Item Dimensions: 8.5 x 3.3 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88471-34010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2000 Toyota Tacoma A/C Accumulator
Looking for affordable OEM 2000 Toyota Tacoma A/C Accumulator? Explore our comprehensive catalogue of genuine 2000 Toyota Tacoma A/C Accumulator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2000 Toyota Tacoma A/C Accumulator Parts Q&A
- Q: How to service and repair the A/C Accumulator on 2000 Toyota Tacoma?A: A proper A/C Accumulator repair method entails first removing refrigerant from the refrigeration system followed by evacuation and system charging with 600 plus or minus 50 g (21.16 plus or minus 1.76 oz.) of refrigerant before leak inspection. The liquid tube between A/C accumulator and cooling unit needs to be disconnected through bolt removal while maintaining 6.0 Nm (60 kg.cm, 52 in.lb) torque setting before the open fittings receive caps for protecting against dirt and moisture contamination. Install the tube by lubricating a new O-ring with compressor oil. After loosening the condenser's nut to disconnect the liquid tube and reaching a torque of 14 Nm (140 kg.cm, 10 ft.lb) you need to remove the two bolts to disconnect both tubes at 6.0 Nm (60 kg.cm, 52 in.lb) before capping the open fittings with compressor oil lubrication of three new O-rings. Locate the holder bolt then pull the A/C accumulator upward after removing it from the holder. The process of A/C accumulator replacement requires a 20 cc (0.71 fl.oz.) addition of ND-OIL 8 or equivalent compressor oil. The final procedure consists of reversing the steps used during removal.