Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left; Front Speed Sensor; Sensor, Speed, Front Driver Side
Manufacturer Note: PART NUMBER LABEL=89543-02030
Position: Front Driver Side
Replaces: 89543-02010
Part Name Code: 89543
Item Weight: 0.90 Pounds
Item Dimensions: 10.3 x 6.7 x 2.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89543-02030
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2000 Toyota Corolla Submodels:
Base, CE, DX, LE, S, VE | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
2000 Toyota Corolla Speed Sensor
Looking for affordable OEM 2000 Toyota Corolla Speed Sensor? Explore our comprehensive catalogue of genuine 2000 Toyota Corolla Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2000 Toyota Corolla Parts Questions & Experts Answers
Q: How to service the rear wheel speed sensor on 2000 Toyota Corolla?
A: The service process for the rear wheel speed sensor involves disconnecting its connector by removing the seat cushion and seatback followed by the lower center garnish then the rear door scuff plate and finally the room partition trim. The service requires users to first disconnect the speed sensor connector after which the sensor wire harness with grommet should be pulled from its spot followed by the removal of 2 clamp bolts which hold the sensor wire harness against the body and suspension shock absorber at an 8.0 Nm (82 kgf-cm, 71 inch lbs.) torque. Eliminate the speed sensor from the axle carrier using 8.0 Nm (82 kgf-cm, 71 inch lbs.) as the torque requirement. The operator should uninstall the rear axle hub component using a torque of 80 Nm (820 kgf-cm, 59 ft. lbs.). After reversing the applicable steps for removal you should inspect the speed sensor signal after completing installation.