My Garage
Cart
Make sure this part fits

Toyota 89465-06250
Oxygen Sensor, Driver Side

2007-2018 Toyota 8946506250

Customer Questions & Expert Answers (10)
Toyota 89465-06250 Oxygen Sensor, Driver Side
Toyota 89465-06250 Oxygen Sensor, Driver Side
  • Part Description
    Sensor, Oxygen; Oxygen Sensor, Rear Left
  • Position
    Driver Side
  • Replaces
    89465-33360
  • Manufacturer
    Toyota
Make sure this part fits
$123.60 MSRP: $174.97
You Save: $51.37 (30%)
Ships in 1 Business Day
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Manufacturer Part Number89465-06250
    Part DescriptionSensor, Oxygen; Oxygen Sensor, Rear Left
    Other NamesRear Oxygen Sensor; Front Oxygen Sensor; Lower Oxygen Sensor
    Manufacturer NoteLH
    Item Dimensions8.1 x 4.0 x 1.9 inches
    Item Weight0.60 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces89465-33360
    ManufacturerToyota
    SKU89465-06250
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2018 Toyota AvalonBase, Hybrid Limited, Hybrid XLE, Limited, Touring, XL, XLE, XLE Premium, XLE Touring, XLS4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
    2007-2014 Toyota CamryLE, SE, XLE6 Cyl 3.5 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you provide the right 89465-06250 for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 89465-06250 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to Properly Install Oxygen Sensors for the Emission Control System on Toyota Avalon? Posted by Customer
    A:
    The installation procedure of the heated oxygen sensors for the 2GR-FE emission control system requires Special Service Tool: 09224-00010 to fasten the 2 oxygen sensors onto the front pipe assembly with a specified torque of 44 Nm (449 kgf-cm, 32 ft-lbf) for the first sensor and 40 Nm (408 kgf-cm, 30 ft-lbf) for the second sensor. A torque wrench with a 300 mm (11.81 in.) fulcrum length should be used during installation. You should finish the installation by connecting both oxygen sensor connectors.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the procedure for the air fuel ratio sensor in the 2008 Toyota Camry? Posted by Customer
    A:
    Simply disconnect the sensor connector and use Special Service Tool: 09224-00010 to remove the sensor, taking care not to cause any damage.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oxygen Sensor
    Q:
    What needs to be removed after disconnecting the sensor connector for the 2010 Toyota Camry? Posted by Customer
    A:
    Remove the wire harness clamp.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oxygen Sensor
    Q:
    What is the final step after tightening the heated oxygen sensor for the 2007 Toyota Camry? Posted by Customer
    A:
    Connect the heated oxygen sensor connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oxygen Sensor
    Q:
    What should be noted about the specified torque when using the Special Service Tool for the 2010 Toyota Camry? Posted by Customer
    A:
    The torque must be adjusted based on the length of the tool.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oxygen Sensor
    Q:
    What is the next step after disconnecting the oxygen sensor connectors for the 2009 Toyota Avalon? Posted by Customer
    A:
    Remove the 2 oxygen sensors from the front pipe assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oxygen Sensor
    Q:
    What is the first step to install the oxygen sensors for the 2GR-FE emission control system for the 2008 Toyota Avalon? Posted by Customer
    A:
    First, install the 2 oxygen sensors onto the front pipe assembly using Special Service Tool: 09224-00010.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oxygen Sensor
    Q:
    What should be ensured during the removal process of the heated oxygen sensor for the 2010 Toyota Camry? Posted by Customer
    A:
    Ensure that the sensor is not damaged during the process.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oxygen Sensor
    Q:
    Where should the heated oxygen sensor be removed from for the 2009 Toyota Camry? Posted by Customer
    A:
    The heated oxygen sensor should be removed from the exhaust pipe assembly front No. 3.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Oxygen Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 89465-06250, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 89465-06250 Oxygen Sensor, Driver Side. It is sometimes referred to as Toyota Oxygen Sensor. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 8946506250 Oxygen Sensor, Driver Side. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery