My Garage
Cart
Make sure this part fits

Toyota 13502-28010
Camshaft

2001-2006 Toyota 1350228010

Customer Questions & Expert Answers (12)
Toyota 13502-28010 Camshaft
  • Part Description
    Camshaft Sub-Assembly
  • Part Name Code
    13512
  • Replaces
    13502-0H010, 13502-0H020
  • Manufacturer
    Toyota
Make sure this part fits
$335.51 MSRP: $479.03
You Save: $143.52 (30%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Part Name Code13512
    Manufacturer Part Number13502-28010
    Part DescriptionCamshaft Sub-Assembly
    Item Dimensions20.9 x 3.4 x 2.9 inches
    Item Weight4.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces13502-0H010, 13502-0H020
    ManufacturerToyota
    SKU13502-28010
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2006 Scion tCBase4 Cyl 2.4 L GAS
    2002-2006 Toyota CamryBase, LE, SE, XLE4 Cyl 2.4 L GAS
    2001-2003 Toyota HighlanderBase4 Cyl 2.4 L GAS
    2001-2005 Toyota RAV4Base, L, Sport4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, BATTERY EV (EV/BEV)
    2004-2006 Toyota SolaraSE, SE Sport, SLE4 Cyl 2.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 13502-28010 a good match for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 13502-28010 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the procedure for the camshaft timing gear assembly for the 2005 Scion tC? Posted by Customer
    A:
    Clamp the camshaft in a vise, cover oil ports with vinyl tape, apply air pressure to the oil path, and turn the camshaft timing gear counterclockwise.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How do you ensure the camshaft is properly fixed for the 2003 Toyota Camry? Posted by Customer
    A:
    Fix the camshaft and tighten the camshaft timing gear set bolt to 54 Nm (551 kgf-cm, 40 ft. lbs.), ensuring not to damage the valve lifter.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How do you check the alignment after installing the camshaft for the 2002 Toyota Camry? Posted by Customer
    A:
    Check the match marks on the timing chain and camshaft timing sprockets, and the alignment of the pulley groove with the timing mark of the chain cover.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How do you set No. 1 cylinder to TDC/compression for the 2005 Toyota Camry? Posted by Customer
    A:
    Turn the crankshaft pulley to align its groove with the timing mark 0 of the timing chain cover, ensuring the timing marks of the camshaft timing gear and sprocket align with the bearing caps, and place paint marks on the timing chain.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How do you remove the camshaft timing pulley for the 2004 Toyota Camry? Posted by Customer
    A:
    Use Special Service Tool: 09960-10010 (09962-01000, 09963-01000), 09249-63010 for both RH and LH timing pulleys, ensuring to arrange them for reassembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How do you remove the cylinder head cover sub-assy for the 2001 Toyota Highlander? Posted by Customer
    A:
    Disconnect the engine wire harness clamp and remove the bolts, 2 nuts, cylinder head cover, and gasket.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How do you remove the camshaft timing gear assy for the 2002 Toyota Highlander? Posted by Customer
    A:
    Fix No. 1 camshaft in a vise, cover paths with vinyl tape, apply air pressure into the oil path at 150 kPa, and turn the camshaft timing gear assembly counterclockwise.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How do you remove the No.2 camshaft for the 2003 Toyota Highlander? Posted by Customer
    A:
    Fix the camshaft with a wrench, loosen the camshaft timing gear set bolt, carefully remove the camshaft bearing cap bolts in the specified sequence, then raise the camshaft and remove the set bolt along with the camshaft timing gear and timing chain.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How do you install chain tensioner assy No.1 for the 2004 Toyota Solara? Posted by Customer
    A:
    Raise the ratchet pawl, push in the plunger, and apply the hook to the pin, then install a new gasket and the chain tensioner with 2 nuts, tightening to 9.0 Nm (92 kgf-cm, 80 inch lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How do you remove the camshaft for the 2006 Toyota Solara? Posted by Customer
    A:
    Loosen the bearing cap bolts in the specified sequence, remove the caps, and take out the camshaft while tying the timing chain with a string to prevent dropping anything inside the timing chain cover.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How do you remove the camshaft timing gear assembly for the 2005 Toyota Solara? Posted by Customer
    A:
    Fix the No. 1 camshaft in a vise, cover all paths with vinyl tape except the advanced side, and apply about 150 kPa (1.5 kgf-cm, 21 psi) of air pressure to the port on the advanced angle side, ensuring the camshaft timing gear can be turned by hand to the advanced angle side.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 13502-28010, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 13502-28010 Camshaft. It is sometimes referred to as Toyota Camshaft. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 1350228010 Camshaft. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery