Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 13053-31010
Camshaft

2003-2015 Toyota 1305331010

Customer Questions & Expert Answers (22)
Toyota 13053-31010 Camshaft
  • Part Description
    Camshaft Sub-Assembly
  • Part Name Code
    13053
  • Manufacturer
    Toyota
Make sure this part fits
$516.19 MSRP: $756.47
You Save: $240.28 (32%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 13053-31010 Camshaft is Ref No. 13 in the diagram below

    2007 Toyota Tundra Camshaft Diagram for 13053-31010
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 13053-31010

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code13053
    Manufacturer Part Number13053-31010
    Part DescriptionCamshaft Sub-Assembly
    Item Dimensions21.4 x 3.5 x 3.0 inches
    Item Weight4.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU13053-31010
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2009 Toyota 4RunnerLimited, Sport, SR56 Cyl 4.0 L GAS
    2007-2009 Toyota FJ CruiserBase, Trail Teams Special Edition, TRD Special Edition6 Cyl 4.0 L GAS
    2005-2015 Toyota TacomaBase, Pre Runner, TRD Pro, X-Runner6 Cyl 4.0 L GAS
    2005-2010 Toyota TundraBase, SR56 Cyl 4.0 L GAS

  • Customer Questions & Expert Answers

    Q:
    Is 13053-31010 a good match for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 13053-31010 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What should be done after installing the No.1 camshaft for the 2005 Toyota 4Runner? Posted by Customer
    A:
    Rotate the No.1 camshaft to align the timing marks, then install chain tensioner assembly No.2, ensuring proper alignment of the mark links and tightening the tensioner bolt.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How should the camshaft be installed to prevent damage for the 2007 Toyota 4Runner? Posted by Customer
    A:
    Keep it level and align the mark link (yellow) with the timing mark (1-dot mark) of the camshaft timing gear.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step in installing the camshaft for the 2003 Toyota 4Runner? Posted by Customer
    A:
    Align the mark link (yellow) with the timing mark (1 dot mark) of the timing gear and apply new engine oil to the thrust portion and journal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What components need to be removed after draining the coolant for the 2006 Toyota 4Runner? Posted by Customer
    A:
    Remove the V-bank cover, disconnect ventilation hose No.2, and remove the air cleaner assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What components should be removed after the bearing cap bolts for the 2008 Toyota 4Runner? Posted by Customer
    A:
    Remove the oil feed pipe, 9 bearing caps, camshaft housing plug, oil control valve filter, and camshafts, taking care to arrange the bearing caps in the correct order.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What is the procedure for installing chain tensioner assembly No. 2 for the 2004 Toyota 4Runner? Posted by Customer
    A:
    Push in the tensioner, insert a 1.0 mm pin, temporarily install the timing gear and tensioner, align the mark links with the timing marks, and tighten the tensioner bolt to the specified torque.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How do you remove the No. 2 chain tensioner assembly for the 2009 Toyota 4Runner? Posted by Customer
    A:
    Take out the No. 2 chain tensioner bolt, then the No. 2 chain tensioner and camshaft timing gear.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What torque should be applied when installing the bolt after aligning the timing tube for the 2008 Toyota 4Runner? Posted by Customer
    A:
    Install the bolt with a torque of 78 Nm, followed by the seal washer and screw plug at 15 Nm.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How do you inspect the camshafts for the 2007 Toyota FJ Cruiser? Posted by Customer
    A:
    Inspect for runout using V-blocks and a dial indicator, measure the cam lobe height with a micrometer, and check the journal diameter.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How do you remove the No. 1 chain tensioner assembly for the 2008 Toyota FJ Cruiser? Posted by Customer
    A:
    Remove the 4 bolts and the timing chain cover plate and gasket, then push in the plunger of the chain tensioner and fix the stopper plate with a 3.5 mm bar before removing the tensioner.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What should you do after checking the timing marks for the 2009 Toyota 4Runner? Posted by Customer
    A:
    Set the No. 1 cylinder to TDC, inspect and adjust valve clearance as necessary, and install the cylinder head cover sub-assembly LH by removing old packing, applying seal packing, and installing the cover with 10 bolts and 2 nuts, tightening to specified torques.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What is the torque specification for the No. 1 camshaft timing gear set bolt for the 2007 Toyota FJ Cruiser? Posted by Customer
    A:
    Tighten it to 100 N*m.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What is the final step in the camshaft removal process for the 2009 Toyota FJ Cruiser? Posted by Customer
    A:
    Remove the No. 4 camshaft sub-assembly and No. 3 chain tensioner assembly, keeping the camshafts level throughout the process to prevent damage, and follow the same steps for the No. 3 camshaft sub-assembly, tying the No. 1 chain with a piece of string to avoid dropping anything inside the timing chain cover.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What precaution should be taken to prevent foreign objects from entering the engine compartment for the 2005 Toyota Tacoma? Posted by Customer
    A:
    Tie the chain.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What is the next step after removing the cylinder head cover for the 2008 Toyota Tacoma? Posted by Customer
    A:
    Remove the timing chain guide and O-ring.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What should you check after installing the camshaft timing gear for the 2008 Toyota Tacoma? Posted by Customer
    A:
    Check for no clearance between the gear's fringe and the camshaft, then tighten the fringe bolt to a torque of 78 Nm (795 kgf-cm, 58 ft-lbf) and confirm that the camshaft timing gear can move to the retard angle side and is locked in the extreme retard position.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What is the next step after securing the stopper plate for the 2006 Toyota Tacoma? Posted by Customer
    A:
    Remove the camshaft timing gear by loosening the 21 bearing cap bolts uniformly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What comes after removing the No. 2 chain vibration damper for the 2009 Toyota Tundra? Posted by Customer
    A:
    Remove the No. 1 chain and the No. 1 chain vibration damper.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What needs to be drained before proceeding with the camshaft removal for the 2009 Toyota Tacoma? Posted by Customer
    A:
    Drain the engine coolant.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after removing the timing chain cover sub-assembly for the 2009 Toyota Tundra? Posted by Customer
    A:
    Set the No. 1 cylinder to TDC/compression.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    Q:
    How do you remove the camshaft timing gear for the 2007 Toyota Tacoma? Posted by Customer
    A:
    Secure the bar with tape and loosen the 21 bearing cap bolts uniformly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Camshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 13053-31010, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 13053-31010 Camshaft. It is sometimes referred to as Toyota Camshaft. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 1305331010 Camshaft. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery