How to remove the fuel injector on Toyota Tundra?

Before removing the 1GR-FE fuel injector users must first discharge fuel system pressure through negative terminal cable removal followed by at least 90-second waiting period after turning off the ignition to allow navigation system memory retention. After disconnecting the 2 ECU connectors for the fuel pumps users must reconnect the battery's negative terminal followed by engine start then letting the engine run to completion. They should then turn the ignition switch OFF before ending the work procedure. Start the engine to verify it does not start then gradually release the fuel tank cap pressure by unscrewing it. The maintenance process starts by disconnecting the negative battery terminal cable before removing the No. 1 engine under cover and draining the engine coolant and front wiper motor and link assembly with front cowl top outer panel sub-assembly and V-bank cover and No. 2 air cleaner hose along with the air cleaner assembly with element and intake air surge tank. To disconnect the No. 1 fuel pipe sub-assembly you must remove its fuel pipe clamp before pinching the tube connector and pulling out the fuel pipe without permitting dust or foreign materials to enter the fuel tube connector. You need to perform this complete procedure for the No. 2 fuel pipe sub-assembly. Proceed by disconnecting all 6 fuel injector connectors from the fuel delivery pipe sub-assembly followed by the removal of its 6 bolts along with pipe and injectors while being cautious to avoid dropping the injectors. After pulling all 6 fuel injectors from the delivery pipe you need to remove the O-ring together with the injector vibration insulator from every component.

How to install the fuel injectors on Toyota Tundra?

Fitting 1GR-FE fuel injectors begins with installing new insulators followed by light oil or gasoline application to O-rings before mounting the injectors onto the system. Secure the six injectors to the fuel delivery pipe through left and right turning each device before positioning them in a manner that exposes the connectors toward the outside. Following installation of the intake manifold positions the fuel delivery pipe through which the 6 injectors will be attached before temporarily bolting it into place. Check the injector rotation with proper O-ring replacement only on injectors that do not move smoothly. The 6 fuel injector connectors should be connected after the 6 bolts receive a torque tightening of 15 Nm (153 kgf-cm, 11 ft-lbf). For the No. 2 fuel pipe sub-assembly the tube connector should be inserted into the pipe until it clicks while inspecting for any damage or foreign material before applying a clamp. Perform this installation procedure also for the second fuel pipe sub-assembly. Attach the intake air surge tank along with the air cleaner assembly containing its element as well as the No. 2 air cleaner hose. After connecting the cable to the negative battery terminal it should be noted that system initialization procedures might be needed for specific systems. The correct procedure to check fuel leaks involves starting the Techstream on the DLC3 port and powering the ignition without engine start while accessing the proper menu for controlling fuel pump speed. A fuel leak inspection should happen after maintenance concludes. The final assembly requires check-up of engine coolant leaks followed by installing the V-bank cover together with the front cowl top outer panel sub-assembly, front wiper motor and link assembly and No. 1 engine under cover.

OEM Toyota Tundra Fuel Injector

Gas Injector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

20 Fuel Injectors found

View related parts
Toyota Tundra Injector
Part Number: 23209-62040
$176.95 MSRP: $252.65
You Save: $75.70 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel; Fuel Injector; Injector Assembly, Fuel
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2004 Toyota Tundra | Base, SR5 | 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Injector
Part Number: 23209-09110
$182.43 MSRP: $260.47
You Save: $78.04 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel; Fuel Injector; Injector Assembly, Fuel
- Manufacturer Note: MARK=23250-0S010
- Replaces: 23209-39135
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2008 Toyota Tundra | Base, Limited, SR5 | 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Injector
Part Number: 23209-09151
$153.21 MSRP: $216.89
You Save: $63.68 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel; Fuel Injector; Injector Assembly, Fuel
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2021 Toyota Tundra | 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Injector
Part Number: 23209-09100
$166.72 MSRP: $236.01
You Save: $69.29 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel; Fuel Injector; Injector Assembly, Fuel
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2010 Toyota Tundra | Base, SR5 | 6 Cyl 4.0 L GAS
View related parts
Toyota Tundra Injector Assembly, Fuel
Part Number: 23209-39165
$154.74 MSRP: $219.05
You Save: $64.31 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel; Fuel Injector
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2021 Toyota Tundra | 1794 Edition, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Injector
Part Number: 23209-F4010-06
$339.47 MSRP: $484.69
You Save: $145.22 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel; Injector Assembly, Fuel(For Direct)
- Manufacturer Note: MARK 6,REFER REPAIR MANUAL
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2023 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Injector
Part Number: 23209-F4010-03
$339.47 MSRP: $484.69
You Save: $145.22 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel; Injector Assembly, Fuel(For Direct)
- Manufacturer Note: MARK 3,REFER REPAIR MANUAL
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2023 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Injector
Part Number: 23209-F4010-09
$339.47 MSRP: $484.69
You Save: $145.22 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel; Injector Assembly, Fuel(For Direct)
- Manufacturer Note: MARK 9,REFER REPAIR MANUAL
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2023 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Injector
Part Number: 23209-39445
$144.28 MSRP: $204.25
You Save: $59.97 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector, Assembly Fuel; Injector Assembly, Fuel
- Replaces: 23209-39215
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2014 Toyota Tundra | Base, SR, SR5 | 6 Cyl 4.0 L GAS
View related parts
Toyota Tundra Injector
Part Number: 23209-39015
$178.12 MSRP: $254.31
You Save: $76.19 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel; Fuel Injector; Injector Assembly, Fuel
- Manufacturer Note: DENSO
- Replaces: 23209-39075, 23209-39035
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2006 Toyota Tundra | Base, SR5 | 6 Cyl 4.0 L GAS
View related parts
Toyota Tundra Injector Assembly, Fuel(For Direct)
Part Number: 23209-F4010-02
$339.47 MSRP: $484.69
You Save: $145.22 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel
- Manufacturer Note: MARK 2,REFER REPAIR MANUAL
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2023 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Injector
Part Number: 23209-0F010
$192.91 MSRP: $275.44
You Save: $82.53 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel; Fuel Injector; Injector Assembly, Fuel
- Manufacturer Note: (L)
- Replaces: 23209-50040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2004 Toyota Tundra | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Injector
Part Number: 23209-F4010-01
$336.09 MSRP: $479.86
You Save: $143.77 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel; Injector Assembly, Fuel(For Direct)
- Manufacturer Note: MARK 1,REFER REPAIR MANUAL
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2023 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Injector Assembly, Fuel(For Direct)
Part Number: 23209-F4010-08
$323.04 MSRP: $461.24
You Save: $138.20 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel
- Manufacturer Note: MARK 8,REFER REPAIR MANUAL
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2023 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Injector
Part Number: 23209-F4010-04
$323.04 MSRP: $461.24
You Save: $138.20 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel; Injector Assembly, Fuel(For Direct)
- Manufacturer Note: MARK 4,REFER REPAIR MANUAL
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2023 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Injector
Part Number: 23209-F4010-05
$323.04 MSRP: $461.24
You Save: $138.20 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel; Injector Assembly, Fuel(For Direct)
- Manufacturer Note: MARK 5,REFER REPAIR MANUAL
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2023 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Injector
Part Number: 23209-F4010-07
$326.30 MSRP: $465.89
You Save: $139.59 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel; Injector Assembly, Fuel(For Direct)
- Manufacturer Note: MARK 7,REFER REPAIR MANUAL
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2023 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Injector
Part Number: 23209-39185
$142.87 MSRP: $202.24
You Save: $59.37 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel; Fuel Injector; Injector Assembly, Fuel
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2019 Toyota Tundra | 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 8 Cyl 5.7 L FLEX
View related parts
Toyota Tundra Injector Assembly, Fuel
Part Number: 23209-0F020
$177.07 MSRP: $252.81
You Save: $75.74 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel; Fuel Injector
- Manufacturer Note: (L)
- Replaces: 23209-50080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2009 Toyota Tundra | Base, Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Injector Assembly, Fuel(For Port)
Part Number: 23209-F9070
$153.56 MSRP: $217.39
You Save: $63.83 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Set, Fuel
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2023 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS

Toyota Tundra Fuel Injector

Choose genuine Fuel Injector that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Fuel Injector for your Toyota Tundra? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tundra parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Fuel Injector in Toyota Tundra is a vital element of the vehicle's fuel system that injects fuel directly into the engine cylinder to match the mixture with the current load requirement. Packaged by the engine control unit, the functions of these injectors are in some manner electronic as opposed to the carburetor in improving efficiency and efficiency of the engine. Fuel injectors commonly have problems like clogs, leakage, or jamming, which can cause poor idle, rough running, low power and fuel economy of the Toyota Tundra. As it is with all automobile engines, one was required to take appropriate action whenfuel injectors are faulty to avoid harm to the engine and high consumption of power by the vehicle. The Fuel Injector system in the Toyota Tundra vehicles has undergone through a series of changes with some types of Fuel Injectors as the Direct Injector and the Indirect injector both of them with their own strength concerning the delivery of fuel and the control of the engine.

Toyota Tundra Fuel Injector Parts and Q&A

Injector
23209-09110
Q: How to remove the fuel injector on Toyota Tundra?
A:
Before removing the 1GR-FE fuel injector users must first discharge fuel system pressure through negative terminal cable removal followed by at least 90-second waiting period after turning off the ignition to allow navigation system memory retention. After disconnecting the 2 ECU connectors for the fuel pumps users must reconnect the battery's negative terminal followed by engine start then letting the engine run to completion. They should then turn the ignition switch OFF before ending the work procedure. Start the engine to verify it does not start then gradually release the fuel tank cap pressure by unscrewing it. The maintenance process starts by disconnecting the negative battery terminal cable before removing the No. 1 engine under cover and draining the engine coolant and front wiper motor and link assembly with front cowl top outer panel sub-assembly and V-bank cover and No. 2 air cleaner hose along with the air cleaner assembly with element and intake air surge tank. To disconnect the No. 1 fuel pipe sub-assembly you must remove its fuel pipe clamp before pinching the tube connector and pulling out the fuel pipe without permitting dust or foreign materials to enter the fuel tube connector. You need to perform this complete procedure for the No. 2 fuel pipe sub-assembly. Proceed by disconnecting all 6 fuel injector connectors from the fuel delivery pipe sub-assembly followed by the removal of its 6 bolts along with pipe and injectors while being cautious to avoid dropping the injectors. After pulling all 6 fuel injectors from the delivery pipe you need to remove the O-ring together with the injector vibration insulator from every component.
Injector
23209-09100
Q: How to install the fuel injectors on Toyota Tundra?
A:
Fitting 1GR-FE fuel injectors begins with installing new insulators followed by light oil or gasoline application to O-rings before mounting the injectors onto the system. Secure the six injectors to the fuel delivery pipe through left and right turning each device before positioning them in a manner that exposes the connectors toward the outside. Following installation of the Intake Manifold positions the fuel delivery pipe through which the 6 injectors will be attached before temporarily bolting it into place. Check the injector rotation with proper O-ring replacement only on injectors that do not move smoothly. The 6 fuel injector connectors should be connected after the 6 bolts receive a torque tightening of 15 Nm (153 kgf-cm, 11 ft-lbf). For the No. 2 fuel pipe sub-assembly the tube connector should be inserted into the pipe until it clicks while inspecting for any damage or foreign material before applying a clamp. Perform this installation procedure also for the second fuel pipe sub-assembly. Attach the intake air surge tank along with the air cleaner assembly containing its element as well as the No. 2 air cleaner hose. After connecting the cable to the negative battery terminal it should be noted that system initialization procedures might be needed for specific systems. The correct procedure to check fuel leaks involves starting the Techstream on the DLC3 port and powering the ignition without engine start while accessing the proper menu for controlling fuel pump speed. A fuel leak inspection should happen after maintenance concludes. The final assembly requires check-up of engine coolant leaks followed by installing the V-bank cover together with the front cowl top outer panel sub-assembly, front Wiper Motor and link assembly and No. 1 engine under cover.

Related Toyota Tundra Parts

Browse Toyota Tundra Fuel Injector by Years

2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000