How to install the windshield wiper motor assembly on Toyota Tundra?

The(Thread) installation process for the windshield wiper motor assembly starts with securing the wiper motor with 3 bolts at 7.5 Nm torque (75 kgf-cm equals 66 in-lbf) then make sure to apply MP grease on the crank arm pivot. The rod of the wiper link must be connected to the crank arm. Use 4 bolts with a nut to secure the front wiper motor along with link assembly at 7.0 Nm (71 kgf-cm, 62 in-lbf) torque while connecting the appropriate connector. Push the cowl top ventilator louver sub-assembly towards its mount points to attach both 8 claws and 2 clips. The same opening technique should be used to connect the claw when mounting the front fender to cowl side seal LH as for the RH-side installation. The 16 claws should be used to secure the hood to cowl top seal. The front wiper arm and blade installation requires a stopped wiper motor at automatic mode then cleaning of wiper arm and pivot points before tightening the assembly with a nut to 20 Nm (204 kgf-cm, 15 ft-lbf) torque while using hand pressure on the wiper arm hinge. Perform a similar process on the front wiper arm and blade assembly for the right side while checking for correct positioning and operation by activating the wipers as you apply washer fluid to the windshield glass to confirm clear vehicle body space.

OEM Toyota Tundra Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wiper Motors found

View related parts
Toyota Tundra Wiper Motor, Front
Part Number: 85110-0C010
$183.24 MSRP: $261.63
You Save: $78.39 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Motor Assembly, Front Wiper; Windshield Wiper Motor; Front Motor; Motor Assembly, Windshield Wiper
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2006 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Wiper Motor, Front
Part Number: 85110-0C030
$223.55 MSRP: $319.18
You Save: $95.63 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly, Front Wiper; Windshield Wiper Motor; Front Motor; Motor Assembly, Windshield Wiper
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2021 Toyota Tundra | 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Wiper Motor, Front
Part Number: 85110-0C020
$188.49 MSRP: $269.12
You Save: $80.63 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly, Front Wiper; Windshield Wiper Motor; Front Motor; Motor Assembly, Windshield Wiper
- Manufacturer Note: COLD SPEC
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2006 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Wiper Motor, Front
Part Number: 85110-0C040
$152.03 MSRP: $215.22
You Save: $63.19 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly, Front Wiper; Windshield Wiper Motor; Front Motor; Motor Assembly, Windshield Wiper
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2024 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS

Toyota Tundra Wiper Motor

Choose genuine Wiper Motor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Wiper Motor for your Toyota Tundra? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tundra parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Tundra Wiper Motor Parts and Q&A

Wiper Motor, Front
85110-0C030
Q: How to install the windshield wiper motor assembly on Toyota Tundra?
A:
The(Thread) installation process for the Windshield wiper motor assembly starts with securing the wiper motor with 3 bolts at 7.5 Nm torque (75 kgf-cm equals 66 in-lbf) then make sure to apply MP grease on the crank arm pivot. The rod of the wiper link must be connected to the crank arm. Use 4 bolts with a nut to secure the front wiper motor along with link assembly at 7.0 Nm (71 kgf-cm, 62 in-lbf) torque while connecting the appropriate connector. Push the cowl top ventilator louver sub-assembly towards its mount points to attach both 8 claws and 2 clips. The same opening technique should be used to connect the claw when mounting the front fender to cowl side seal LH as for the RH-side installation. The 16 claws should be used to secure the hood to cowl top seal. The front wiper arm and blade installation requires a stopped wiper motor at automatic mode then cleaning of wiper arm and pivot points before tightening the assembly with a nut to 20 Nm (204 kgf-cm, 15 ft-lbf) torque while using hand pressure on the wiper arm hinge. Perform a similar process on the front wiper arm and blade assembly for the right side while checking for correct positioning and operation by activating the wipers as you apply washer fluid to the windshield glass to confirm clear vehicle body space.