How to install the exhaust pipe on Toyota Tundra?

The first step for installing the 1GR-FE engine exhaust pipes in Regular Cab Standard Decks involves mounting the Air Fuel Ratio Sensor for Bank 1 Sensor 1 and Bank 2 Sensor 1 followed by mounting the Heated Oxygen Sensor for Bank 1 Sensor 2 and Bank 2 Sensor 2. The front exhaust pipe installation process starts by placing a new gasket before connecting to the correct exhaust manifold with three new nuts torqued to 54 Nm (554 kgf-cm, 40 ft-lbf). Afterward, connect the air fuel ratio sensor with the heated oxygen sensor connectors and attach their respective wire clamps. The last step of the procedure includes installing the front No. 2 exhaust pipe assembly with its new gasket to the exhaust manifold on the left-hand side while using three new nuts torqued to 54 Nm (554 kgf-cm, 40 ft-lbf) to secure the pipe and completing the installation by connecting both air fuel ratio sensor and heated oxygen sensor connectors. The front No. 3 exhaust pipe sub-assembly requires a new gasket on the front No. 2 exhaust pipe before installation on the exhaust pipe support using two bolts and two new nuts torqued to 48 Nm (489 kgf-cm, 35 ft-lbf). Install the center exhaust pipe assembly to the three supports after applying new gaskets to each front exhaust pipe on both right and left sides and tighten its four bolts to 48 Nm (489 kgf-cm, 35 ft-lbf). The tailpipe assembly must connect to the exhaust pipe support with a new gasket placed on the center exhaust pipe before it is secured with a new clamp torqued to 32 Nm (326 kgf-cm, 24 ft-lbf) maintaining proper clamp angle installation range and verifying exhaust gas leak prevention.

How to Properly Remove the Exhaust Pipe on Toyota Tundra?

Start the procedure of removing the 1GR-FE engine exhaust pipe in the Regular Cab Standard Deck by wearing gloves because the exhaust pipe needs time to cool down. Start by removing the tailpipe assembly after you detach the bolt and clamp and break the connection between tailpipe and exhaust pipe support. The next step requires you to remove the center exhaust pipe assembly through bolt removal from 4 mounting points and then by disconnecting it from 3 exhaust pipe supports. Starting at the front side of the vehicle unfasten the two bolts maintaining the No. 3 exhaust pipe sub-assembly on the exhaust pipe sub-assembly. The process to remove the front No. 2 exhaust pipe includes disconnecting both the air fuel ratio sensor and heated oxygen sensor connectors before untightening three nuts from the assembly. The front exhaust pipe requires the air fuel ratio sensor connector and heated oxygen sensor connector disconnect along with unclamping the 2 heated oxygen sensor wires and removing all 3 front exhaust pipe nuts. The technicians will remove the air fuel ratio sensors that attached to Bank 1 Sensor 1 and Bank 2 Sensor 1 alongside the heated oxygen sensors that affix to Bank 1 Sensor 2 and Bank 2 Sensor 2.

OEM Toyota Tundra Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

75 Exhaust Pipes found

View related parts
Toyota Tundra Front Pipe Part Number: 17410-0S070
$1589.67 MSRP: $2133.80
You Save: $544.13 (26%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter, Right; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2017 Toyota Tundra | 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Muffler & Pipe, Rear Part Number: 17405-07010
$528.10 MSRP: $708.87
You Save: $180.77 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Sub-Assembly, Exhaust; Rear Muffler; Muffler Assembly; Direct-Fit; System Kit; Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2006 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Muffler & Pipe, Center Part Number: 17420-0S022
$532.08 MSRP: $714.20
You Save: $182.12 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Muffler Assembly; Direct-Fit Exhaust; System Kit; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Center
- Manufacturer Note: MEXICO SPEC
- Position: Center
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2013 Toyota Tundra | Base, Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Tail Pipe Part Number: 17430-0S011
$265.26 MSRP: $346.89
You Save: $81.63 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Tail Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tailpipe; Pipe Assembly, Exhaust, Tail
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2021 Toyota Tundra | 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Crossover Pipe Part Number: 17106-62020
$311.04 MSRP: $406.76
You Save: $95.72 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Sub-Assembly, Exhaust; Exhaust Crossover Pipe; Exhaust Pipe; Cross Over Pipe; Pipe Sub-Assembly, Exhaust Crossover
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000 Toyota Tundra | Base, SR5 | 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Intermediate Pipe, Center Part Number: 17403-0F010
$342.38 MSRP: $447.74
You Save: $105.36 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Sub-Assembly, Exhaust; Exhaust Muffler, Center; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Center Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2002 Toyota Tundra | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Front Pipe Part Number: 17410-0S011
$1746.75 MSRP: $2344.65
You Save: $597.90 (26%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter, Right; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Replaces: 17410-0S010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2013 Toyota Tundra | Base, Limited, Platinum, SR5 | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Front Pipe, Driver Side Part Number: 17450-0S190
$1432.59 MSRP: $1922.94
You Save: $490.35 (26%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Front; Catalytic Converter; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front Driver Side
- Replaces: 17450-0S030, 17450-0S160, 17450-0S031
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2017 Toyota Tundra | 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Tail Pipe Part Number: 17430-0F010
$255.59 MSRP: $334.25
You Save: $78.66 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Tail Pipe; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Tailpipe; Pipe Assembly, Exhaust, Tail
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2014 Toyota Tundra | Base, Limited, SR, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Tail Pipe Part Number: 17430-0S010
$328.87 MSRP: $430.07
You Save: $101.20 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Tail Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tailpipe; Pipe Assembly, Exhaust, Tail
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2010 Toyota Tundra | Base, Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Front Pipe Part Number: 17410-0F050
$1495.81 MSRP: $2007.81
You Save: $512.00 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter, Right; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2006 Toyota Tundra | Base, Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Front Pipe Part Number: 17410-0S020
$1659.02 MSRP: $2226.88
You Save: $567.86 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter, Right; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2013 Toyota Tundra | Base, Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS
View related parts
Toyota Tundra Front Pipe, Driver Side Part Number: 17450-0S050
$1807.59 MSRP: $2426.31
You Save: $618.72 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Front; Catalytic Converter; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2013 Toyota Tundra | Base, Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS
View related parts
Toyota Tundra Front Pipe, Driver Side Part Number: 17450-0S060
$1967.17 MSRP: $2640.52
You Save: $673.35 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Front; Catalytic Converter; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010 Toyota Tundra | Base, Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS
View related parts
Toyota Tundra Muffler & Pipe, Center Part Number: 17420-0S060
$435.94 MSRP: $585.16
You Save: $149.22 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Muffler; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Center
- Position: Center
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2021 Toyota Tundra | 1794 Edition, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Muffler & Pipe, Center Part Number: 17420-0F030
$485.20 MSRP: $651.28
You Save: $166.08 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Muffler; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Center
- Position: Center
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2013 Toyota Tundra | Base, Limited, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Muffler & Pipe, Center Part Number: 17420-0S070
$519.02 MSRP: $696.69
You Save: $177.67 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Muffler; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Center
- Position: Center
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2021 Toyota Tundra | 1794 Edition, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Muffler & Pipe, Rear Part Number: 17405-0F040
$562.04 MSRP: $754.42
You Save: $192.38 (26%)
ADD TO CART
Product Specifications
- Other Name: Pipe Sub-Assembly, Exhaust; Rear Muffler; Muffler Assembly; Direct-Fit; System Kit; Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Tail
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2006 Toyota Tundra | Base, Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Front Pipe Part Number: 17410-0F030
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter, Right; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2004 Toyota Tundra | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Front Pipe, Driver Side Part Number: 17450-0F050
Product Specifications
- Other Name: Pipe Assembly, Exhaust Front; Catalytic Converter, Left; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2004 Toyota Tundra | Limited, SR5 | 8 Cyl 4.7 L GAS

| Page 1 of 4 |Next >

1-20 of 75 Results

Toyota Tundra Exhaust Pipe

Choose genuine Exhaust Pipe that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Exhaust Pipe for your Toyota Tundra? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tundra parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Exhaust Pipe is a significant part that stresses the solidity and functionality of the Toyota Tundra series. Serving the purpose of a well-tuned escape route for toxic fumes including carbon monoxide, the exhaust pipe keeps these deadly organisms out of the vehicle interior thereby increasing passenger protection. Applicable to different Tundra generations, including the first and the second ones, the Exhaust Pipe is an essential part of the vehicle's performance and effectiveness. The position and structure of this component assist in nullifying concerns such as vibrations, which stem from usage and deterioration. However, it is worth mentioning that configuration of exhaust pipe might be different, the additional pipes are produced to improve performance and sound. This flexibility apart from adding to Tundra's presumed invincibility also tells more about Toyota's ingenuity in the automotive niche. The Exhaust Pipe differentiates itself because it can be functional as well as safe for usage in the vehicle so that the vehicle has a smooth run. Due to its reliability and necessity to the function of the exhaust system, the Exhaust Pipe exemplifies Toyota's mastery of engineering, making it a smart decision for Tundra drivers who wish for the premier experience on the road.

Toyota Tundra Exhaust Pipe Parts and Q&A

Front Pipe
17410-0S070
Q: How to install the exhaust pipe on Toyota Tundra?
A:
The first step for installing the 1GR-FE engine exhaust pipes in Regular Cab Standard Decks involves mounting the Air Fuel Ratio Sensor for Bank 1 Sensor 1 and Bank 2 Sensor 1 followed by mounting the Heated Oxygen Sensor for Bank 1 Sensor 2 and Bank 2 Sensor 2. The front exhaust pipe installation process starts by placing a new gasket before connecting to the correct Exhaust Manifold with three new nuts torqued to 54 Nm (554 kgf-cm, 40 ft-lbf). Afterward, connect the air fuel ratio sensor with the heated oxygen sensor connectors and attach their respective wire clamps. The last step of the procedure includes installing the front No. 2 exhaust pipe assembly with its new gasket to the exhaust manifold on the left-hand side while using three new nuts torqued to 54 Nm (554 kgf-cm, 40 ft-lbf) to secure the pipe and completing the installation by connecting both air fuel ratio sensor and heated oxygen sensor connectors. The front No. 3 exhaust pipe sub-assembly requires a new gasket on the front No. 2 exhaust pipe before installation on the exhaust pipe support using two bolts and two new nuts torqued to 48 Nm (489 kgf-cm, 35 ft-lbf). Install the center exhaust pipe assembly to the three supports after applying new gaskets to each front exhaust pipe on both right and left sides and tighten its four bolts to 48 Nm (489 kgf-cm, 35 ft-lbf). The tailpipe assembly must connect to the exhaust pipe support with a new gasket placed on the center exhaust pipe before it is secured with a new clamp torqued to 32 Nm (326 kgf-cm, 24 ft-lbf) maintaining proper clamp angle installation range and verifying exhaust gas leak prevention.
Front Pipe, Driver Side
17450-0F130
Q: How to Properly Remove the Exhaust Pipe on Toyota Tundra?
A:
Start the procedure of removing the 1GR-FE engine exhaust pipe in the Regular Cab Standard Deck by wearing gloves because the exhaust pipe needs time to cool down. Start by removing the tailpipe assembly after you detach the bolt and clamp and break the connection between tailpipe and exhaust pipe support. The next step requires you to remove the center exhaust pipe assembly through bolt removal from 4 mounting points and then by disconnecting it from 3 exhaust pipe supports. Starting at the front side of the vehicle unfasten the two bolts maintaining the No. 3 exhaust pipe sub-assembly on the exhaust pipe sub-assembly. The process to remove the front No. 2 exhaust pipe includes disconnecting both the air fuel ratio sensor and heated Oxygen Sensor connectors before untightening three nuts from the assembly. The front exhaust pipe requires the air fuel ratio sensor connector and heated oxygen sensor connector disconnect along with unclamping the 2 heated oxygen sensor wires and removing all 3 front exhaust pipe nuts. The technicians will remove the air fuel ratio sensors that attached to Bank 1 Sensor 1 and Bank 2 Sensor 1 alongside the heated oxygen sensors that affix to Bank 1 Sensor 2 and Bank 2 Sensor 2.