OEM Toyota Solara Throttle Body

Toyota Solara Throttle Body Parts and Q&A

• Throttle Body
  22030-0H021
  Q: How to service and repair the throttle body on Toyota Solara?

  A:

  Service and repair to the throttle body requires starting with accessing the engine coolant. First remove the air cleaner cap together with its hose before unmounting the throttle body assembly through throttle control motor and throttle position sensor connector removal and detachment of the vacuum hose and both water by-pass hoses. Starting with bolt removal the team must also disconnect the fuel pipe support and throttle body along with letting through the gasket. Users must place a new gasket on the intake manifold before installing the throttle body and fuel pipe support together using four bolts which require a torque setting of 30 N.m (305 kgf.cm, 22 ft.lbf). Reinstall both water by-pass hoses together with the throttle control motor and throttle position sensor connector and vacuum hose onto the throttle body. After placing the air cleaner cap and air cleaner hose together, engine coolant addition requires checking for all engine coolant leak points.
• Throttle Body
  22030-0H031
  Q: How to install the throttle body assembly on Toyota Solara?

  A:

  The first step for throttle body installation onto the 2AZ-FE engine control system involves application of a new gasket onto the intake manifold. The application of 4 bolts with 30 Nm torque (305 kgf-cm, 22 ft-lbf) will hold the throttle body and fuel pipe support. Begin by attaching the vent hose as well as the 2 water by-pass hoses and throttle control motor and throttle position sensor connector on the throttle body and finishing with the vacuum hose. Add engine coolant and verify engine coolant leaks afterward you install the air cleaner cap along with the air cleaner hose.