How to remove the Fuel Level Sensor on Toyota Solara?

To remove the Fuel Level Sensor from the 2AZ-FE, first discharge fuel system pressure and disconnect the negative battery terminal. For both Coupe and Convertible, remove the rear seat cushion assembly and rear floor service hole cover. Then, detach the fuel pump tube, vent tube plate, suction tube assembly, and finally, the fuel level sensor assembly.

How to service the Fuel Level Sensor Assembly on Toyota Solara?

In order to service the 2AZ-FE Fuel Level Sensor Gauge Assembly, release the fuel pressure and unconnect the negative battery terminal. Take out the rear seat cushion and floor service hole cover and then extract the fuel components. Install the battery and install the other parts in reverse sequence, checking there is no leakage, and lastly replace the seat assembly.

OEM Toyota Solara Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Fuel Level Sensors found

View related parts
Toyota Solara Gage Assembly, Fuel Sender
Part Number: 83320-33030
$172.60 MSRP: $244.34
You Save: $71.74 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Pump Module Assembly; Fuel Level Sensor; Fuel Sending Unit
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999-2003 Toyota Solara | SE, SLE | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Solara Fuel Gauge Sending Unit
Part Number: 83320-07010
$95.74 MSRP: $134.38
You Save: $38.64 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Hanger Assembly; Tank Sending Unit; Pump Module; Level Sensor; Level Sensor; Fuel Sender Unit; Sending Unit; Tank Sending Unit
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2008 Toyota Solara | SE, SLE, Sport | 6 Cyl 3.3 L GAS
View related parts
Toyota Solara Fuel Gauge Sending Unit
Part Number: 83320-06030
$95.74 MSRP: $134.38
You Save: $38.64 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Hanger Assembly; Fuel Level Sensor; Tank Sending Unit; Fuel Sender Unit; Sending Unit
- Replaces: 83320-33100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2008 Toyota Solara | SE, SLE, Sport | 4 Cyl 2.4 L GAS
View related parts
Toyota Solara Fuel Gauge Sending Unit
Part Number: 83320-06010
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Hanger Assembly; Pump Module; Tank Sending Unit; Level Sensor; Fuel Sender Unit; Sending Unit; Gauge Unit
- Manufacturer Note: (L)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Toyota Solara | SE, SE Sport, SLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS

Toyota Solara Fuel Level Sensor

If you're thinking about purchasing OEM parts for your Toyota Solara, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Solara Fuel Level Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Solara Fuel Level Sensor Parts and Q&A

Fuel Gauge Sending Unit
83320-06030
Q: How to remove the Fuel Level Sensor on Toyota Solara?
A: To remove the Fuel Level Sensor from the 2AZ-FE, first discharge fuel system pressure and disconnect the negative battery terminal. For both Coupe and Convertible, remove the rear seat cushion assembly and rear floor service hole cover. Then, detach the fuel pump tube, vent tube plate, suction tube assembly, and finally, the fuel level sensor assembly.
Fuel Gauge Sending Unit
83320-07010
Q: How to service the Fuel Level Sensor Assembly on Toyota Solara?
A: In order to service the 2AZ-FE Fuel Level Sensor Gauge Assembly, release the fuel pressure and unconnect the negative battery terminal. Take out the rear seat cushion and floor service hole cover and then extract the fuel components. Install the battery and install the other parts in reverse sequence, checking there is no leakage, and lastly replace the seat assembly.